Very impressive, as is your pile of firewood!!
Panel work is next for me, I'm finding it a bit daunting and keep putting it off for any reason; I've never done any panel beating in my life before so I'm not too sure how to approach it...
Peter.
Printable View
Very impressive, as is your pile of firewood!!
Panel work is next for me, I'm finding it a bit daunting and keep putting it off for any reason; I've never done any panel beating in my life before so I'm not too sure how to approach it...
Peter.
Very carefully and gently with aluminium panels.Quote:
Originally Posted by OneOff
Cheers Rod
Ps...im leaving my dents in. Too scary for me..
Aim is to have all three bays of that woodshed stacked to the roof within the next month cutting season ends on the end of November but it's hard yakka later in the season in the heatQuote:
Originally Posted by OneOff
One bay stacked 6 rows deep equals one winter burn
A little car progress pondering seat belts at the moment and how to fit in a topless configuration.
Not sure if I need them for rego
Cheers Paul
Quote:
Originally Posted by 67hardtop
I agree Gently with a good dolly behind
Rod is there any chance you could post a picture of those series 3 seat belt mounts you showed me in Adelaide.......I vaguely remember them being on tub wall but I could be wrong and just can't picture them now, should of taken a picture while there[bigwhistle]
Cheers Paul
Ill try Paul,
https://www.aulro.com/afvb/images/im...017/09/523.jpg
Shoulder mount and reel at the bottom
https://www.aulro.com/afvb/images/im...017/09/524.jpg
Rear mount of the reel inside the tub is just an alloy plate.
https://www.aulro.com/afvb/images/im...017/09/525.jpg
The mount plates under the front lip of the tub where the buckles and lap centre belt are mounted.
https://www.aulro.com/afvb/images/im...017/09/526.jpg
The strap that bolts from the buckle mounts back to the chassis s3 onwards.
https://www.aulro.com/afvb/images/im...017/09/527.jpg
The shoulder mount brackets for lwb van style body.
I dont have a pic of the lower mount but its the same as current defenders in the rear corner of the seat tub.
Hope this helps.
Cheers Rod
Work on 2a has slowed a bit due to DELWAP doing some roadside clearing providing some easy get fire wood[smilebigeye]
Attachment 129870 Attachment 129871 Attachment 129872
Did some work on bulkhead aligning
Attachment 129873
Which led to the invention of special tool #2
Attachment 129874 Attachment 129875
Bulkhead is now parallel to tub, I unwrapped my doors to find bubble wrap had telegraphed into finish[bawl] so sand and respray ....have left over paint
Attachment 129881 Pic before bulkhead aligned
Cheers Paul
Nice firewood!
And a real easy get you can drive right up to it....we've done ten loads so far, so five or six to go to fill our wood sheds to capacityQuote:
Originally Posted by grey_ghost
Probably 3 years worth of burning....what usually happens is after they clear roadside they wait for it to dry out a bit then burn it ....I don't think they will risk it this year with the bush as dry as it is....fortunately their are only 50 permanent residents in our little town so there's plenty for everyone
Cheers Paul
Darn I was that I lived closer to you!
Quote:
Originally Posted by grey_ghost
"Road trip", with the Series and a couple of trailers of course [wink11] [biggrin]
