Thread: Series 2 with no serial numbers

Originally Posted by au.shammus

Hi all, I bought what I believe to be a series 2 109, from a farm in Tenterfield, on checking the serial plate it is warn smooth and there is no stamp on the front right spring hanger, the only numbers are on the pressed metal corp stamp are, 109 2984 any assistance in identifying my beastie would be appreciated
Cheers Owen

Both of my Series 2’s had a chassis number on the left rear spring hanger…

Ok thanks I will take a look on Sunday

Series 2 or 2a?
My early Series 2a number is on the rear of the rear of the LH spring hanger. Took a while to clean it up so readable.
Have a look and see if you can see anything.
From memory an early S2 with 2L motor (121) I sold had the number in the same spot.

whitehillbilly

If it is an Australian built 2 or 2a it should have the number on the LH rear back spring hanger, facing out. You may have to remove multiple layers of paint and/or rust to see it.

I spent about an hour with degreaser and a wire brush with no joy, my next visit north will be in early August so i will take some paint stripper and an electric wire brush. ill
add a couple of photos in no particular order, the good thing is he / she starts but doesn't run well. The old stromberg they put on just leaks fuel. the plate for the serial number is completely smooth REar View.jpg20240616_060309469_iOS.jpg20240613_053729917_iOS.jpg20240616_060259731_iOS.jpg20240616_050057309_iOS.jpg20240506_070650861_iOS.jpg20240616_010633362_iOS.jpg20240614_055105570_iOS.jpg

If you take the plate off, you may see remains of the stamping.
HB pencil rubbed over the back may also help.