Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Wheel Bearings - Prices

  1. #1
    Join Date
    Jan 1970
    Location
    Yea, Victoria, Australia
    Posts
    872
    Total Downloaded
    0

    Wheel Bearings - Prices

    Hi

    I need a set of wheel bearings for the Series 2a. Repco have kits (SKF bearings - 2 bearings and a seal I presume) for $177.35 for each side. I would need 2 sides. Now I have seals so I really only needs the bearings.

    Any other places to ring who may be able to sell them a little cheaper. I would rather good bearings (SKF, Timkin, etc)

    Dick

  2. #2
    Join Date
    Jan 1970
    Location
    Dalby
    Posts
    4,011
    Total Downloaded
    0
    I don't know what is so special about those bearings but the bearings for my Disco1 cost $40/wheel for Timken bearings. So $20 per bearing. This is from my local bearing shop whose name I forget.
    Extra for the seals but I get them elsewhere.

    Surely Series bearings wouldn't be much different.

  3. #3
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Go to your local bearing shop, such as SKF - last time I got bearings from them they had both a cross reference for Landrover part numbers and application data that covered Series Landrovers. And from memory they were around $20 each, but that was a few years ago.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  4. #4
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0
    I had quotes worse than that when I got my last set, went to the bearing place and it was waaay cheaper!
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member

  5. #5
    Join Date
    Jan 2008
    Location
    -
    Posts
    189
    Total Downloaded
    0
    That sounds really exxy.

    Try your local non dealership LandRover/4wd repair shop, or dare I say fleabay.

  6. #6
    Join Date
    Jan 1970
    Location
    Yea, Victoria, Australia
    Posts
    872
    Total Downloaded
    0
    Ah yes Ebay. I bought some "Timkin" bearings on ebay and received the wellknown TWT bearings.

    Rich

  7. #7
    Join Date
    Jan 2007
    Location
    Perth, WA
    Posts
    1,655
    Total Downloaded
    0
    Try Four Wheel Drives in Vic on (03) 98 900509 - $27 per bearing for my 110 and seem to be reasonable on all LR parts. Haven't ordered yet, so don't know what make.
    Jeff

    1994 300TDi Defender
    2010 TDV8 RRS

  8. #8
    Join Date
    Jan 1970
    Location
    Canberra, Australia
    Posts
    786
    Total Downloaded
    0
    Try trader: clr4x4 on EBay. I have found that Gary knows series LRs, reasonable price, quick post etc....
    Michael T
    2011 L322 Range Rover 4.4 TDV8 Vogue
    Aussie '88 RR Tdi300 (+lpg), Auto (RIP ... now body removed after A pillar, chassis extension to 130 & fire tender tray.)

  9. #9
    Join Date
    Jan 1970
    Location
    Yea, Victoria, Australia
    Posts
    872
    Total Downloaded
    0
    Thanks everyone for your input,

    I contacted Bearing Service Centre and they quoted me a price of $243 inc for 2 kits.

    Maybe these are just expensive bearings...

    Rich

  10. #10
    Join Date
    Jun 2003
    Location
    Launceston, Tasmania
    Posts
    12,347
    Total Downloaded
    0
    1994 Discovery TDi
    2004 Discovery 2 TD5
    2010 Discovery 4 TDV6
    1961, Series 2 Ambulance. 108-098 - Eden

    Registry of Ex Military Land Rovers Mem. 129
    Defence Transport Heritage Tasmania Member

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!