According to my workshop manual, the thermostat should start to open at 71-76C, fully open at 88C. This suggests a normal operating temperature of 80-90C.
John
So in my continuing efforts to sort out the cooling problems on the 2.6 litre six i am chasing details on what is the operating temp range for this motor. I am going to try and source an aftermarket gauge and would like to know what is acceptable water temp for this motor.
According to my workshop manual, the thermostat should start to open at 71-76C, fully open at 88C. This suggests a normal operating temperature of 80-90C.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
I use to use these 25 years ago and found that they were always good with extreme temperatures
They just seem to run cool I cant remember to be honest but would of said 80-85 Degrees
thermo fully open at 88 normal operating temp of about 85-95 upper limit about 102
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks