Reply With QuoteLate Series 3 used a throttle cable if I remember rightly. You should be able to use all the bits from this (cable, pedal), and they should be readily available from anyone who sells Series stuff.
John
Fossicker
Hello to all,
Just joined and glad to be here. Several years ago I rescued a 1975 series 3 swb 88" and was going to do a quick resto on it. Before i knew it i was staring at the chassis and a full restoration was happening. It came with a holden 202 swap, quite common, and is nearly completed. However.......the accelerator rod linkage assembly from pedal to stromberg carby has gone and i am searching high and low for info on a throttle cable mod. I'm sure it's been done, I'm sure it's been talked about on here before, and at the risk of being annoying, I'm asking for some help. I've posted some pics in the members gallery. Any help would be greatly appreciated. Thanx
RoverLord
Late Series 3 used a throttle cable if I remember rightly. You should be able to use all the bits from this (cable, pedal), and they should be readily available from anyone who sells Series stuff.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Fossicker
And there it is! Thanks John, the parts book I've been ordering from has no throttle cable or rod linkage parts for series landy's at all. I'll check it out and see what i can get.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks