Results 1 to 10 of 10

Thread: Wanted: series 3 doors Brisbane

  1. 15th February 2008, 02:42 PM #1
    45tr0
    45tr0 is offline Master
    Join Date
    Dec 2007
    Location
    Sale, Vic
    Posts
    204
    Total Downloaded
    0

    Wanted: series 3 doors Brisbane

    Hi all,

    Chasing Series 3 door uppers in Brisbane, in reasonable nick. mine are completely eaten through on the inside.

    also chasing a set of 3 x door locks/latches/key (driver, passenger, rear) - my locks are buggered and i'd really like to secure the old girl from time to time!

    i know i'm asking miracles, but we can always hope!
    Reply With Quote Reply With Quote
  2. 15th February 2008, 04:36 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    hi, miricals are us here...

    I think Ive got a set of workable door tops you can negotiate with me for....

    what part of the locks arent working and what type do you have? the pin push and twist ones or the ones with the arm that rotates down to lock the lever?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 16th February 2008, 10:45 AM #3
    45tr0
    45tr0 is offline Master
    Join Date
    Dec 2007
    Location
    Sale, Vic
    Posts
    204
    Total Downloaded
    0
    the locks are the lever type i think - they have a small lever in a curved track that lifts up on the inside? The driver's side is still functional, passenger side opens and closes fine but the lock wont raise. Rear door opens and closes, but the locking part of the mechanism is gone.

    will drop you a PM about the door tops
    Reply With Quote Reply With Quote
  4. 27th May 2008, 08:30 PM #4
    Brisso57's Avatar
    Brisso57
    Brisso57 is offline Fossicker Subscriber
    Join Date
    Apr 2008
    Location
    Brisbane, western suburbs
    Posts
    83
    Total Downloaded
    0

    More doors wanted for a LWB Ute

    I need both LH and RH doors for a SIII ute.

    Does anyone (in Greater Brisbane) have any they wish to sell, or trade for?
    I can offer the bull bar from hell. ;-)

    Thanks

    Doug
    ---------------------------------------------
    "Nothing succeeds like a budgie without a beak."
    Reply With Quote Reply With Quote
  5. 27th May 2008, 09:31 PM #5
    Lost Landy's Avatar
    Lost Landy
    Lost Landy is offline Master
    Join Date
    Nov 2007
    Location
    Cedar Grove SE QLD
    Posts
    776
    Total Downloaded
    0
    Hi i have a few sets of doors kicking around here ill see how good they are and let you know if your interested.
    Reply With Quote Reply With Quote
  6. 28th May 2008, 09:25 PM #6
    keeffe88
    keeffe88 is offline Fossicker
    Join Date
    Dec 2007
    Location
    Bulimba, Brisbane - QLD
    Posts
    61
    Total Downloaded
    0
    I wouldnt mind a set of door tops if anyone had some lying around...
    What is the going rate for a set of door tops in resonable nick, i really have no idea and im sure you good people would give me an honest answer.

    Cheers,
    Josh
    Reply With Quote Reply With Quote
  7. 29th May 2008, 07:38 AM #7
    Brisso57's Avatar
    Brisso57
    Brisso57 is offline Fossicker Subscriber
    Join Date
    Apr 2008
    Location
    Brisbane, western suburbs
    Posts
    83
    Total Downloaded
    0

    Swapping County doors on to a SIII

    I see from another thread on this forum that "early" County doors will be a good fit on a SIII.

    door swap

    Can anyone assist the search by defining "early"? i.e. If I look at a wreck's construction "plate", what is the month/year I need to find a vehicle older than?

    cheers

    PS If anyone is wrecking such a County (in SE Qld) pls PM me.

    Doug
    ---------------------------------------------
    "Nothing succeeds like a budgie without a beak."
    Reply With Quote Reply With Quote
  8. 29th May 2008, 02:37 PM #8
    stage1slave
    stage1slave is offline Master
    Join Date
    Jul 2006
    Location
    Sunshine Coast
    Posts
    374
    Total Downloaded
    0
    'Early' is from 1984/85 through to present day. Anything with wind up windows really. I have seen ones in good nick go for quite big money tho. Watch out for electrolysis and rusted bottom frames. Wind up windows attract water retention and if the drain holes[if any] get blocked, they can rust badly.
    cheers
    ER
    Reply With Quote Reply With Quote
  9. 29th May 2008, 02:44 PM #9
    stage1slave
    stage1slave is offline Master
    Join Date
    Jul 2006
    Location
    Sunshine Coast
    Posts
    374
    Total Downloaded
    0
    Quote Originally Posted by keeffe88 View Post
    I wouldnt mind a set of door tops if anyone had some lying around...
    What is the going rate for a set of door tops in resonable nick, i really have no idea and im sure you good people would give me an honest answer.

    Cheers,
    Josh
    I paid 25 bucks for 1 off fleabay in not too bad nick recently. Has a little bit of rust under the baily channel. Hope this helps.
    cheers
    ER
    Reply With Quote Reply With Quote
  10. 29th May 2008, 03:05 PM #10
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    Quote Originally Posted by Brisso57 View Post
    I see from another thread on this forum that "early" County doors will be a good fit on a SIII.

    door swap

    Can anyone assist the search by defining "early"? i.e. If I look at a wreck's construction "plate", what is the month/year I need to find a vehicle older than?
    All 90/110/Defender doors will fit Series 2/2a/3 and vice versa - except for issues about the door check device, which can be worked round. (there are at least four different lock/striker plates, but they are all interchangeable, even if it means drilling a few holes.

    But! Windup window doors are of two basic types, the early ones with lift up handles, and the later ones with push button handles (87 on). Both are thicker than the Series doors with sliding windows, the push button ones a lot thicker, so that with the introduction of them, the outboard seats had to be moved inboard about 2", and a smaller steering wheel fitted (which may well be an issue with no power steering). This is the reason the early, i.e. lift up handle ones, are suggested. Don't need a date or a chassis number, just look at the type of outside handle.

    The newer type are more durable - the early ones were not Landrover's best design effort, but both are a lot heavier than the sliding window doors, and personally I would not consider going to windup windows on a Series Landrover.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« Series 2a/3 Rear Diff Centers | What are these bits, then? Part I »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!