Thread: salisbury rebuild info needed

as above i am going to be rebuilding a salisbury diff soon with new bearings through out i need a manual to do this i have rebuilt many rockwell diffs in the past but never anything this small with crush washers etc i have a 12tonne press with a gauge and all the tools needed just mainly need specs etc

Hi Cooter ;

Not quite sure if there is any info in here

http://www.d-90.com/tech/arb.html

about Salisbury diff rebuild that might

be off help?

Edit:

Timken bearings

2 sets in the rear and 2 sets in the front, each set has 1 cup and 1 cone.
Each set should cost around $10. For a 1995 Defender 90, each set
consists of one # LM102949 and one # LM102910.