-
13th October 2010, 01:07 PM
#11
Hiya All,
Been a while since I posted this and just thought I'd update on the cure.
After many attempted fixes, and thinking I'd sorted it twice...only to have it start re-ocurring, I noticed that when it stalled, the fuel gauge dropped.
Eureka moment - got a new ignition switch, and bob's your mother's brother, haven't had a problem for 2 weeks now!!
Thanks to all for your help and advice.
Cheers,
-
14th October 2010, 09:24 PM
#12
My old series 2a would cut out when you steered to the left 
Took ages to find out what was causing it 
There were no wires touching the steering what so ever!
In the end I took to it with a pair of wire cutters , and cut the lot out! Eventually found the problem to be broken wires in the main loom
Just a small amount of flex in the firewall was enough to stop ya dead in ya tracks
Glad i pulled the cutters out as a few other parts of the loom were just as bad!
Full rewire and it never missed a beat again.
-
15th October 2010, 08:27 AM
#13
Geez and I thought my problem was tricky - I think I probably would've lost my mind trying to figure that one out. 
Persistence is definitely the key to series ownership....and a small amount of insanity haha. 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Reply With Quote
Bookmarks