Thread: Hand Brake knob

There is a thin rod runs up the handle, and the knob is screwed onto the end of this. The rod and knob are spring loaded by a spring below the knob, and since the rod is attached to the ratchet, this spring loads the ratchet. There is a good pictiure in the parts book.

John

Thanks John.
Do the knobs come off easy ????
So if the knob is not fitted, the ratchet pawl doesn't work ????
The order would be, knob. spring, washer with the threaded rod through the middle, connected to a Second horizontal rod, then to the pawl.
Are the parts book on this site somewhere ????

whitehillbilly