Thread: Dash instrument bulbs

Are they Edison or bayonet? The Smiths instruments in my old Hillmans used a BA7s base, some were BA9s, too, I think.

I would think that Edison screw bulbs would/could screw out with vibration.

BA7s below:

T2BA7s_2.jpg


BA9s below:

10_65_15_B.jpg

Someone posted details of LED globes sourced from ebay, maybe under the Series III section.

If you're going with conventional globes I can get them at trade price. I replaced the ones in my Series III and it didn't make any difference, instruments must be dirty inside or it's time to consider LED's.


Colin

Originally Posted by gromit

Someone posted details of LED globes sourced from ebay, maybe under the Series III section.

If you're going with conventional globes I can get them at trade price. I replaced the ones in my Series III and it didn't make any difference, instruments must be dirty inside or it's time to consider LED's.


Colin

Hi Colin. Thanks for that. I'm looking for globes as well, this thread was very timely for me. I had a quick look on the threads and believe this is the link you're referring to: Land Rover Series 1 2 2a Dash bulbs LED E10 Warm White Original Look x6 232590 | eBay
I've ordered a set for mine. I will post pictures once installed.

Well, there you go.

Who'd have thought that a manufacturer would use Edison Screw lamps in car electrics. Perhaps it was a special to reinforce the Lucas "Prince of Darkness" reputation.

Thanks everyone, I have ordered the LED bulbs off ebay. I have bought from that seller (charlie) before and been very happy with the outcome.

Cheers,
John