Station Wagon door lower seal

**gromit** · 6th March 2023, 11:35 AM

I'm trying to get my Dormobile ready for Cooma.
The lower door seal had decomposed so I removed it some time ago, I'm sure I took a photo but now can't find it !
If someone could post a picture I can try to get the seal from a local rubber supplier.

Thanks,

Colin

**gromit** · 7th March 2023, 02:41 PM

Couldn't find a decent picture but looks like a 'P' seal, if so I can source locally.

Just realised.....I'll have a look at the Defender tonight it probably didn't change over the years !

Colin

**jerryd** · 12th March 2023, 12:25 AM

I rececently bit the bullet and purchased genuine seals for the doors including the sill sections. On trying the sill section (loosely) and the hinged end of the front door, I found it impossible to shut the door

This is really disappointing especially when you consider the cost.

Needless to say I've put in a complaint and will be getting a refund. Next problem now is trying to source a replacement rubber seal

**gromit** · 12th March 2023, 07:44 AM

For the bottom I'm copying what what's on my Defender.
900mm of P seal cost $6 from a local rubber supplier.

The other seals I'll be making, I've sourced the seal material and also steel for the internal strip plus rivets and a rivet squeezer.
Marking out & punching the holes in the strip will be fun.
Not sure about the top seal which curves at each end

A few seal on mine have been replaced but Sikaflex'd in place so I have to mechanically remove the Sikaflex !

Colin

Thread: Station Wagon door lower seal

Thread Tools

Station Wagon door lower seal

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions