Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Thread: RODS RODS RODS

  1. #1
    Join Date
    Aug 2012
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0

    RODS RODS RODS

    ok I have ordered GOE rods ...pretty excited
    can you please post photos of you Discos and RRS with rods
    I am curious ....Im i right in thinking that if i want to get to normal hight I should stick it in access mode?
    and off road will be super extend mode ?
    so what doe the triple rod do?
    I am sure its on this site somewhere ...
    please direct me to a link even

  2. #2
    Join Date
    Feb 2007
    Location
    Brisbane
    Posts
    4,497
    Total Downloaded
    0
    The rods (using the off road hole) just push all the height selection up one. Normal is off road, off road is extended, etc.

    I've never driven the car for any distance at normal height (access mode selected) as I leave the rods set (say at Fraser Is) for the week then once off the ferry, select the normal mode hole which takes maybe 60 seconds to do all 4 wheels.

  3. #3
    SBD4's Avatar
    SBD4 is offline A Keeper of the TGO Gold Subscriber
    Join Date
    Dec 2011
    Location
    Bundeena
    Posts
    2,809
    Total Downloaded
    0
    Cheers,

    Sean

    “Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.” - Albert Einstein

  4. #4
    Join Date
    Aug 2012
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0
    All good I now understand that the 3rd setting is for emergencies only.....great

  5. #5
    Join Date
    May 2012
    Location
    Melbourne
    Posts
    238
    Total Downloaded
    0
    Just fitted Gordon's rods this past weekend. The last task before heading off to Cape York for 6 weeks. They are so easy to adjust once you get the originals off.

    I am looking forward to that extra 50mm ride height once away from the black top.

    I fitted the Mitch hitch, with the rods in extended mode(shorter) the base of the Mitch hitch sits 600mm above ground level, this will put the TVAN rear down about 100mm. Will post some picks once coupled and ready to go.

    Regards

    Gerald
    VK3GJM

  6. #6
    Join Date
    Aug 2012
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0
    Greats stuff mate sounds like you are of on a great trip....jealous..looking forward to the pictures

  7. #7
    Join Date
    Oct 2010
    Location
    Wentworth, almost Victoria
    Posts
    22
    Total Downloaded
    0
    Hey Gerlad

    Which way are you headed to the Cape? I'll keep an eye out for you.

    Leaving Wentworth probably Wed heading towards Menindee, Broken Hill, Tiboburra, Inaminka etc. Plan to head towardsThe coast from there.

    Steve

    D4 with a Tvan on the back also

    QUOTE=VK3GJM;1976090]Just fitted Gordon's rods this past weekend. The last task before heading off to Cape York for 6 weeks. They are so easy to adjust once you get the originals off.

    I am looking forward to that extra 50mm ride height once away from the black top.

    I fitted the Mitch hitch, with the rods in extended mode(shorter) the base of the Mitch hitch sits 600mm above ground level, this will put the TVAN rear down about 100mm. Will post some picks once coupled and ready to go.

    Regards

    Gerald
    VK3GJM[/QUOTE]

  8. #8
    Join Date
    May 2012
    Location
    Melbourne
    Posts
    238
    Total Downloaded
    0
    Hi Steve & herrblick,

    It's been 6 months in planning, looking forward to the drive, scenery and people.

    Heading of Wednesday, Melbourne to Dubbo, St George, 3-4 nights in Carnarvan Gorge, then head to Undara, Cairns where we meet three other vehicles to head to the cape on the 9th via Daintree and lakefield old Laura.

    Regards

    Gerald

    VK3GJM

  9. #9
    Join Date
    Apr 2012
    Location
    Sydney
    Posts
    791
    Total Downloaded
    0
    Only word of advice, plenty of silicon spray or even WD40 onto the originals before taking them off and when the GOE rods go on, get them nice and lubed for ease of changing. And simply enjoy!

  10. #10
    Join Date
    Dec 2008
    Location
    Prospect 2148
    Posts
    581
    Total Downloaded
    0
    Gerald and Ben
    I ordered some rods for the D3 last week. Hopeing they will get to me beofre the weekend so that I can install them and be ready for the D3/D4?RRS weekend.
    Apart from liberal amount of silicon spray, any other tricks/pitfalls in getting the origianl ones off?
    thanks
    Mike

Page 1 of 5 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!