Thread: V8 MAF TEST & GROUP BUY

Originally Posted by cockie55

By the way I have had some participants say they would rather share their working experiences with these units direct with me rather on open forum. That approach is fine. Cheers

What sort of info would you like posted up?

The first things that come to mind are ease of fitting and fuel economy before and after. Anything else in particular you want posted up?

stuee when these units arrive I will make up a standard Q&A to generate info on their operation and post it in the "testing" thread http://www.aulro.com/afvb/technical-...upplier-2.html as this thread here will cease when all units have been ordered.

I'm in for one if it's still available. I just filled up with ULP and did some errands. Something is definitely not right. Power down low is quite flat, but as the revs rise it really flattens off (anything above about 2500 RPM). The IGN on voltage is right on 0.30V, but it takes about 10 seconds to drop from 0.80 when the power has been turned off and on again.

I've suspected mine was NQR for a while, but it runs so well on LPG I don't bother with ULP unless traveling.

Will send a PM.

Subject to payments all clearing this "Group Buy" is now closed.

MacMan secured the last one. Thanks to all who participated.

Any discussion on MAF "testing" including how successful these units from this group buy proved to be, should all be posted at this thread Air Flow Meter Supplier

Any news on when these units will arrive?

cheers, Steve

were the hell was i a month ago... grrrr

Hi folks!

Been searching and searching for MAF solutions to my dying collection of 3AM and 5AM units, and I found this thread. How did the units perform in the end? Any chance of another group buy?

Cheers

Steve

Originally Posted by rangerovering

Hi folks!

Been searching and searching for MAF solutions to my dying collection of 3AM and 5AM units, and I found this thread. How did the units perform in the end? Any chance of another group buy?

Cheers

Steve

interested