Results 1 to 3 of 3

Thread: New guy needs to know about springs!!!

  1. 10th April 2010, 10:14 PM #1
    Oscarthegrouch Guest

    New guy needs to know about springs!!!

    Hi guys you've proberbly been asked this before but does anyone know if disco 1990-2000 30mm lifted springs will fit a 84 rangie? Your help will be greatly appreciated.
    Reply With Quote Reply With Quote
  2. 11th April 2010, 08:23 AM #2
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Yes Disco 1 springs will fit .However Disco1 went from 1990 to 1999 in Australia. Disco 2 (1999 to 2004?)springs will not fit AFAIK.

    Be aware that D1 rear springs are usually much stiffer than fitted to an RRc as the RRC has a load leveller (which may not work now anyway) while D1 did not.

    I prefer the ride of lighter rear springs supplemented by the leveller even on a lifted car.
    Regards Philip A
    Reply With Quote Reply With Quote
  3. 11th April 2010, 10:22 AM #3
    nzlandies's Avatar
    nzlandies
    nzlandies is offline Master
    Join Date
    Jan 2009
    Posts
    169
    Total Downloaded
    0
    I too prefer to keep the load leveler and use lighter springs in a Range Rover. The ride is significantly better. In all respects the springs you have mentioned will "fit" but the rates will be suited for a vehicle of different weight so the 30mm may be more like 50mm as the disco weighs more and has no leveler. I would recommend the proper springs. The cost is of the wrong springs is too high if it ruins your car.
    Reply With Quote Reply With Quote
« 3 Amigos - any help for a non-techy | Stub axle seal? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!