Hi guys you've proberbly been asked this before but does anyone know if disco 1990-2000 30mm lifted springs will fit a 84 rangie? Your help will be greatly appreciated.
Swaggie
SubscriberYes Disco 1 springs will fit .However Disco1 went from 1990 to 1999 in Australia. Disco 2 (1999 to 2004?)springs will not fit AFAIK.
Be aware that D1 rear springs are usually much stiffer than fitted to an RRc as the RRC has a load leveller (which may not work now anyway) while D1 did not.
I prefer the ride of lighter rear springs supplemented by the leveller even on a lifted car.
Regards Philip A
Master
I too prefer to keep the load leveler and use lighter springs in a Range Rover. The ride is significantly better. In all respects the springs you have mentioned will "fit" but the rates will be suited for a vehicle of different weight so the 30mm may be more like 50mm as the disco weighs more and has no leveler. I would recommend the proper springs. The cost is of the wrong springs is too high if it ruins your car.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
AULRO.com Copyright 2001 - 2025 Independently Owned and Operated by Dave Blears Computing - DavecandoIT - AULRO.com LAND ROVER and its logo are the registered trademarks of Land Rover. Land Rover is not affiliated with AULRO.com. |
|
Reply With Quote
Bookmarks