Standard towbar heights are roughly 400-450mm off the ground. So I'd be looking to modify the caravan.
Otherwise you'll need to modify every vehicle that ever tows it.
I need some help re the tow bar set up for a Range Rover Sport 2008 and a 2+ Ton off road caravan.
The tow bar height I need for the caravan is 580-mm.
The factory tow bar on my Range Rover Sports 2008 model is only 430-mm
If we fit a D4 tow bar it sits low and ugly below the bumper and the hayman Reece hitch would sit too far out to be rated for more than 1250kg.
Does anyone know how to raise the tow bar to 580 mm without reducing the tow bar weight from 3500kg?
All replies and advice appreciated.
Skiboy
89 Orange Rangie UTE - our play thing - sadly now sold
75 Rangie/Series/Hybrid/LS3 - Bumblebee with a sting!!!!
2018 RRS - The new touring vehicle - replaces 2012 RRS
Standard towbar heights are roughly 400-450mm off the ground. So I'd be looking to modify the caravan.
Otherwise you'll need to modify every vehicle that ever tows it.
89 Orange Rangie UTE - our play thing - sadly now sold
75 Rangie/Series/Hybrid/LS3 - Bumblebee with a sting!!!!
2018 RRS - The new touring vehicle - replaces 2012 RRS
mitch hitch?
Mitchell Bros 4x4 & more - Online 4wd Store - Discovery 3 Hi-Rise Tow Hitch
after market hitch for D3 and sports i think
i'm sure there are threads on the forum about the development of them
i have no idea if it raises the height
89 Orange Rangie UTE - our play thing - sadly now sold
75 Rangie/Series/Hybrid/LS3 - Bumblebee with a sting!!!!
2018 RRS - The new touring vehicle - replaces 2012 RRS
that was going to be my suggestion to. Although it was developed for the D3, I assume the RRS uses the same plough and is worth a look. Would need to check the profile of the bumper to make sure you can still fit it.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks