PROVENT BULK PURCHASE

Quote:

---

Originally Posted by Fluids

Mate ... Thanks for the photo's ...

How, did you moove the PS steering tank back 20mm (towards the air intake on the inner guard ?)

Second, is it possible to post a photo looking across the bonnet (from passengers side) instead of overhead ? How high up do you have the top of the PV sitting ?

... as it stands now, there aint_much_room ....

Thanks

---

Will try and get another photo tommorrow. Drilled out the spot welds on the bracket for the PS tank and rebolted it closer to the inner guard. Just below the Bracket for the power steering tank bracket there were 2 unused bolt holes so I used these to fix the bracket that I welded up to hold the provent, it is then braced to the ABS module. very tight fit but its not touching or rubbing on anything.
Dylan

Top work andrew my 2 parcels arrived yesterday :D

Mine was delivered today.

Your time and effort is greatly appreciated Andrew.

Thanks,
Tod.

Got mine too thanks Andrew

Quote:

---

Originally Posted by Fluids

Mate ... Thanks for the photo's ...

How, did you moove the PS steering tank back 20mm (towards the air intake on the inner guard ?)

Second, is it possible to post a photo looking across the bonnet (from passengers side) instead of overhead ? How high up do you have the top of the PV sitting ?

... as it stands now, there aint_much_room ....

Thanks

---

Fluids,
Here I hope these help.
Dylan

Fitted my Provent today. Made up a bracket like LandyAndy's , sort of. I'll post up some pictures tomorrow. But should I place them in the good oil section ?

Quote:

---

Originally Posted by dswatts

Fluids,
Here I hope these help.
Dylan

---

Might have to come down and be "head boss person who makes brackets" at Andys and have a fitting day for all the WA guys!! ;)

Quote:

---

Originally Posted by LOVEMYRANGIE

Might have to come down and be "head boss person who makes brackets" at Andys and have a fitting day for all the WA guys!! ;)

---

Sounds like a constructive excuse for a beer:)

Hi Andy,
Mine arrived today, with the money saved I renewed my sub to AULRO!
Once again thankyou.
Now --brackets?? etc.
Steve

Just got home after a couple of weeks away for work, and the parcel with mine and Isuzubob's provents was waiting for me.

Andrew - many thanks for all the hard work you put in to make this happen.

Steve