Reply With QuoteWhat sort of EFI was it you put on, Flapper or 14Cux ? I know with the 14Cux you have to have a resistor in the loom that idetifies the fuel map to use. If it was 14Cux I have a guide by Mark Adams (Efi Guru) I can email to you.
Ivan
Fossicker
YEAH straight to the point I have a stage1 had a holly put fuel injection off 84 rangie on it goes like a crippled dog was wanting to know if i have to put cam from rangeie in as well GOT NEW DIZZY coil leads etc etc help and advice needed
Master
What sort of EFI was it you put on, Flapper or 14Cux ? I know with the 14Cux you have to have a resistor in the loom that idetifies the fuel map to use. If it was 14Cux I have a guide by Mark Adams (Efi Guru) I can email to you.
Ivan
ForumSage
84 RR will be flapper.
Fossicker
4cu is what it is
Master
The cam should not make any difference (as far as I am aware). All the Efi does is supply fuel to the engine. PM me your email and I'll send over the stuff from Mark which is a 14Cux diagnostic guide. It may be one of the sensors is not set up correct or not working (e.g. TPS).
Ivan
ForumSage
Cam will make a huge difference. EFI is set to run within certain parameters, a different cam profile will change those parameters.Originally Posted by Ivan
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks