Results 1 to 9 of 9

Thread: Pics of injectors removed from RRC

  1. 13th April 2011, 10:37 PM #1
    RichardK
    RichardK is offline ChatterBox Silver Subscriber
    Join Date
    Jan 1970
    Location
    Western Australia
    Posts
    2,955
    Total Downloaded
    0

    Pics of injectors removed from RRC

    Just doing a head gasket replacement on the RRC and found a problem with the injectors................here is a sample of what I found...................

    RichardK

    Series IV Matrix Offroad Camper following our Discovery 3 with E Diff, BAS Remap, Mitch Hitch, Uniden UHF, Codan NGT HF, Masten TPMS, Proquip Compressor Guard, ARB Winch Bar, Milemarker Hydraulic Winch, 4x4 Intelligence Rear Wheel Carrier, VMS GPS with Rear Camera,
    Reply With Quote Reply With Quote
  2. 13th April 2011, 10:39 PM #2
    Lucus's Avatar
    Lucus
    Lucus is offline Master
    Join Date
    Mar 2007
    Location
    Perth WA
    Posts
    779
    Total Downloaded
    0
    Is that melted plastic or Varnish?

    If its melted plastic how freaking hot did the motor get??:

    Bin them and get some 19lb Ev6 bosch injectors
    Reply With Quote Reply With Quote
  3. 13th April 2011, 10:42 PM #3
    RichardK
    RichardK is offline ChatterBox Silver Subscriber
    Join Date
    Jan 1970
    Location
    Western Australia
    Posts
    2,955
    Total Downloaded
    0
    Motor got hot when it blew a head gasket and SWMBO didn't notice, what is the difference with the Bosch units?
    RichardK

    Series IV Matrix Offroad Camper following our Discovery 3 with E Diff, BAS Remap, Mitch Hitch, Uniden UHF, Codan NGT HF, Masten TPMS, Proquip Compressor Guard, ARB Winch Bar, Milemarker Hydraulic Winch, 4x4 Intelligence Rear Wheel Carrier, VMS GPS with Rear Camera,
    Reply With Quote Reply With Quote
  4. 13th April 2011, 11:11 PM #4
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Quote Originally Posted by RichardK View Post
    what is the difference with the Bosch units?
    what he said,,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  5. 13th April 2011, 11:58 PM #5
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    Quote Originally Posted by RichardK View Post
    Motor got hot when it blew a head gasket and SWMBO didn't notice, what is the difference with the Bosch units?
    Mike90RR and myself have both done some posts on the Bosch Gen III injectors. Fairly noticeable difference when their in.
    Main thing is the atomization they give. I put up a link to a YouTube vid where they were tested against older design units.
    I you have a look at the intake tracts on the manifold and the head you will see the wash pattern on the walls where it's clean metal and then the varnish deposits around it.
    The Lucas injectors actually spray against the intake wall which kills the atomization of the fuel. The Bosch Gen III basically cures this with the way it mists rather than spray a jet.
    Starting is easier, low end feel is better, waaaaaaaay smoother overall and generally a very worthwhile upgrade.
    Do a search under GEN III and you should find the threads. Not sure if it's in the good oil or not but a quick poke around may turn up the goods.
    I sourced mine from fleabay. Originally fitted to late Ford Mustangs in Obamalamaland.

    Cheers

    Andrew


    I am not a moderator, I am a human being!!!
    Reply With Quote Reply With Quote
  6. 14th April 2011, 09:31 AM #6
    mike 90 RR Guest
    Quote Originally Posted by Pedro_The_Swift View Post


    what he said,,,
    There are GEN 111 threads floating around in the RRC section with pic's


    Quote Originally Posted by LOVEMYRANGIE View Post
    Mike90RR and myself have both done some posts on the Bosch Gen III injectors.
    .... and Wayneg ........ + many others have installed them ....



    even D1 folks will love them
    Reply With Quote Reply With Quote
  7. 14th April 2011, 10:16 AM #7
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    any recommends for poundage?
    lovemyrangie mentioned a figure and a change in flow rates?
    or just pick a colour?

    the price seems reasonable for the improvement,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  8. 14th April 2011, 12:15 PM #8
    mike 90 RR Guest
    Quote Originally Posted by Pedro_The_Swift View Post
    any recommends for poundage?

    Ebay .... Type in "Bosch GEN 111 19 lb Ford mustang" .... Your looking for a yellow colour with 4 pin holes for spray patten
    Reply With Quote Reply With Quote
  9. 14th April 2011, 08:07 PM #9
    LOVEMYRANGIE's Avatar
    LOVEMYRANGIE
    LOVEMYRANGIE is offline YarnMaster
    Join Date
    Feb 2008
    Location
    Northern Windowlickersville WA
    Posts
    3,403
    Total Downloaded
    0
    What he said^^^


    I am not a moderator, I am a human being!!!
    Reply With Quote Reply With Quote
« Centre Diff Question | Need noise insulation to rear wheel arch »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!