Reply With QuoteDoes it help to say I've purchased them recently? I'll see if the no's are on the inv or I kept the bags.
I have looked through microcat for D2 and tried the cooling section on radiator.
but it doesn't list the part.
On the top radiator cowl there are 4 black phillips head screws that 2 are to hold the top hold the rad cowl to the the rad support panel body work, and 2 that join the top rad cowl to the lower cowl halves.
The screw is black, round head phillips head and has a cork screw shank.
(Microcat shows FS1088207L and FS106127L flange heads, there are not the ones I'm after, as these hold the plastic part of the bottom cowl to the radiator.) yet they exist but the is no part number or pic shown.
will upload a pic if some knows them.
TopicToaster
Does it help to say I've purchased them recently? I'll see if the no's are on the inv or I kept the bags.
Master
I've taken this cover off several times and those screws didn't come out of the cover... maybe it's part of the cover and they can't be bought separately try looking for the part number for cover and description.
Master
Ok looks like I could be wrong, looks like they can be bought seperatly.
TopicToaster
There's a separate part, a small white plastic washer that pushes onto the back to keep them in place.
The part number is PZM100060 , I found it after a bit of googling, I then entered the part number into microcat and it took me to the radiator section listed it ,but there did not appear to ber
as number highlighted for it in the diagram. it screws into part number ANR6462 ( DZUS FASTENER Female)
TopicToaster
In hindsight I paid for the plastic bits but an icecream container cutout would do ust as well.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks