Results 1 to 4 of 4

Thread: 300tdi ecu

  1. #1
    Join Date
    Jul 2007
    Posts
    368
    Total Downloaded
    0

    300tdi ecu

    If I was to import a 300tdi with ecu would it be possible to remove all the electrical bits and replace them with standard injectors fuel pump (anything else)?

  2. #2
    Join Date
    Sep 2007
    Location
    Aussie Expat in NZ
    Posts
    3,451
    Total Downloaded
    0
    IIRC the 300tdi doesn't have an ECU...
    Hercules: 1986 110 Isuzu 3.9 (4BD1-T)
    Brutus: 1969 109 ExMil 2a FFT (loved and lost)

  3. #3
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Yes the EDC (electronic Diesel Control) 300Tdi is essentially the same engine in all other aspects. just fit a non EDC injector pump, injectors AND injector lines. The lines are different orientation.

    If you bring in the whole vehicle, You will have NO throttle cable so you will need to source local bits etc to add one. ALSO, if it is an auto you will need to change the trans as they have a full electronic 4HP22E.

    Easy peasy

    JC

  4. #4
    Join Date
    Jul 2007
    Posts
    368
    Total Downloaded
    0
    thanks for that looking at just the engine to deplace my cooked std engine so will be able to just turf the electrical bits and swap the old steam driven bits back in its place. A mate of mine is going to send one over from the uk for fraction of the price of anything sourced locally.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!