Thread: A/C Question

Hi Guys,

I've got a short in my A/C circuit, which I've tracked (so far to one site of the drier (it has RD-0134 on it). One site goes to a relay which is switched in the dash, and the other does to two +12v feeds which are attached to relays under the right hand wing. Note that they don't actually go through the relays themselves.

What are the two terminals on the drier? What should they be connected to?

The wiring is not original at all, and to call it less than professional is being generous.......

Thanks

The terminals on the drier are a pressure switch which shuts the compressor off in the event of low or high gas pressures in the system.