Results 1 to 4 of 4

Thread: Poor idle, running rich.

  1. 28th April 2011, 01:41 PM #1
    V8Ian's Avatar
    V8Ian
    V8Ian is offline Super Moderator
    Join Date
    Dec 2007
    Location
    Back down the hill.
    Posts
    29,779
    Total Downloaded
    0

    Poor idle, running rich.

    My 3.9 smells as if it is running rich, and blows a small amount of black smoke. This car has always been economical, for a heavy V8, but of late is has been using a little more fuel. At times it will idle smothly, yet at other times the idle will fluctuate between 400 and 1,000 rpm and sometimes stalls. The spark is good, plugs, leads, cap and rotor have been recently replaced along with the full recon of the heads. The air filter is clean.
    Does the computer, ecu thingy control the mixture via the MAS, or is there a mixture adjustment somewhere? Could the MAS be dodgey? The fault is intermittent and usually disappears if the air-con is turned on.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif
    Reply With Quote Reply With Quote
  2. 28th April 2011, 02:53 PM #2
    Tank's Avatar
    Tank
    Tank is offline AT REST
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    I beleive that the IAC valve on the back of the plenum chamber is the problem, first check to see that the rubber hoses are connected and/or not split, also check that the 3 allen head bolts are tight.
    If all that checks out , remove the IAC valve and clean soot and crap off the valve plunger and the valve body and where it seats in the plenum (use Throttle body cleaner).
    Still no joy get some Throttle Body cleaner and clean the "Hotwire" which is accessed through a small hole in the top left hand corner, also remove the MAF plug and spray some contact cleaner on the pins, get a small thin screwdriver and very gently prise the pins open and reconnect plug and pull it out a few times to clean the pins and sockets, hope that gets you going again, Regards Frank.
    Reply With Quote Reply With Quote
  3. 28th April 2011, 04:08 PM #3
    V8Ian's Avatar
    V8Ian
    V8Ian is offline Super Moderator
    Join Date
    Dec 2007
    Location
    Back down the hill.
    Posts
    29,779
    Total Downloaded
    0
    Thanks Frank, guess what I'm doing on the weekend.
    If you don't like trucks, stop buying stuff.
    http://www.aulro.com/afvb/signaturepics/sigpic20865_1.gif
    Reply With Quote Reply With Quote
  4. 28th April 2011, 04:57 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    dont forget to check the 2 temp senders on the front of the engine and the actuation of the fuel pressure regulator.

    If the regulator is jammed at the full pressure position you'll run rich.

    poor idle control is almost certainly, as previously mentioned) the IAC.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« CV JOINTS | Stripping polyurethane »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!