Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Turbo Over Speed From 3inch exhuast. on td5

  1. #11
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Tombie run a 3" on his tomb raider defender without turbo failure (It may still have a 3" fitted?).
    It is, I almost hate every alternate Xmas barking my knuckles trying to get the full length filter out past the buger

    Quote Originally Posted by jakeslouw View Post
    Now I'm no auto engineer, but.....

    Surely the velocity of the gasses from the CYLINDER HEAD PORTS determines the speed of the turbo?

    A turbo would experience increased resistance from the inlet air that it is trying to compress, therefore it's not a free-wheeling system?

    Simply saying that increasing the diameter of the exhaust is risky means that all those Isuzu NPR trucks with stock 3-inch+ exhausts are at risk, surely?
    sort of correct, its the velocity (therefore available potential pressure) and the temp of the gasses(while they are hot they can do work) across the turbo. yes with less restriction you get a better drop across the turbine and can extract more work from the gasses but thats balanced off against the work the compressors trying to do. If you split a turbo hose then yes you can easily overspool the turbo and fling it apart BUT the loss of boost sensed by the MAP should wind off the fuel enough to prevent it from killing the turbo.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  2. #12
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    The 2.5 inch exhaust has merit though. What they are saying is with the smaller diameter of the exhaust the gas flow is quicker than a 3 inch exhaust. This creates less back pressure. With a larger volume pipe the gases flow slower. So the bell auto and td5 alive guys think the 2.5 flows better, after all if 3 worked better wouldn't they just sell that as there performance pipe. Just putting it out there.

  3. #13
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    IMHO having worked on the 3 main types we're discussing here

    a 3inch normally bent exhaust works about the same as the 2.5 in mandrel bent unit (the 3 inch being the cheaper of those 2) the 3 inch mandrel bent unit make a different noise and under the right conditions seem to me a little less crisp in picking the turbo back up from mid boost ranges, like when you back off a little then floor it again BUT from very low boost if you hold it pinned the boost seems to come up a little better.

    Its not anything Id pin down as being absolute as other factors may have come in to play but thats how it felt, sounded and how the boost gauges were tweaking.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  4. #14
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by lambrover View Post
    The 2.5 inch exhaust has merit though. What they are saying is with the smaller diameter of the exhaust the gas flow is quicker than a 3 inch exhaust. This creates less back pressure. With a larger volume pipe the gases flow slower. So the bell auto and td5 alive guys think the 2.5 flows better, after all if 3 worked better wouldn't they just sell that as there performance pipe. Just putting it out there.
    Sorry, but this is a crock of bullplop, sprouted by idiots who don't understand maths or fluid mechanics. (not having a go at you lambrover)

    Assuming two pipes (say 2.5" and 3" diameter) the same length, made of the same material, and both operating in the turbulent regime, then:

    Pressure Drop = Velocity^2 / Diameter

    So pressure drop (or back pressure) rapidly INCREASES as velocity increases due to the ^2 term. Increasing pipe diameter increases D and decreases V, both of which reduce pressure drop (back pressure).

    So anyone who says smaller pipes give less back pressure has NFI what they are talking about.

  5. #15
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    oh come on IR Everyone knows that pressure is just the resistance to flow.....

    if the gasses are moving faster they must be at lower pressure...

    quick everyone go out and retro fit 1.25 inch series one exhaust systems and get those exhaust gasses screaming out your exhaust pressures will drop dramatically.
    you might want to consider that this post might have been sarcastic and made with full awareness of just how much easier it is to get to other parts of the vehicle when you fit a spaghetti thin pipe
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #16
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    But isn't it true that different size pipes affect scavaging.

    I am not saying fit the smallest pipe, but could there be a specific size that performs better.

    I am not convinced either way but still wouldn't it behoove them to sell the 3 if it was better.

  7. #17
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    Really i don't know enough about exhausts but the theory of the 2.5 made sense.

    There does seem to be a lot of guys running 3 though

  8. #18
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Overspeed is overboost. They are the same thing.
    You can fit the largest exhaust you want and as long as you control the boost, there will be no problem. If you fit a large exhaust and clamp the wastegate shut then overboost and overspeed is probably going to happen.

    There is no scavenging on a turbo exhaust, it's simply a drain pipe (or drone pipe in some cases).

  9. #19
    Join Date
    Jul 2008
    Location
    Cessnock NSW
    Posts
    1,506
    Total Downloaded
    0
    i see where your coming from lambrover and alot of people use similar theorys on petrol motors with extractor designing but as isuzurover has posted with the formula that proves it.
    i look at it like putting your finger over a hose it boosts pressure up because its coming out of a smaller hole but there isnt any flow and upstream is being restricted compare that to no finger at all and there isnt much pressure but its getting rid of the water faster and hence its getting rid of it up stream which would relate to getting the gasses away from the turbine.

    although if someone with a 2.5" exhaust and someone with a 3" exhaust were to both shut there wastegates off and whoever's turbo goes poof first wins

  10. #20
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by Dougal View Post
    [snip]

    There is no scavenging on a turbo exhaust, it's simply a drain pipe (or drone pipe in some cases).
    Beat me to it, and I had one of those drone pipes, they are awful.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!