Thread: ABS ((!)) and TC LIGHTS WON'T GO OUT!!

I need help. I have a Range Rover 2000 P38 HSE. I have just had the airbags replaced two weeks ago.
One week ago I was driving home and the ABS, the Warning Brake and Traction Control light all came o at the same time. Hand break works fine, breaks are working as normal and I still have traction. (I haven't given it the full jump on the breaks test but they are still very good) Break fluid is at Max level I have not had any other problems. Checked the fuse and they are all clean. Could not get the black fuse module out though from the main fuse house in the egine bay.
I do get an error on the Nanocom under Wabco of
11-02
PUMP PRESSURE SWITCH FAULT
011 TIMES
What is wrong with my car???
I have another question if I have to replace the ABS Pressure Pump where should I go? I have seen ones that aren't range rover, but say they are the same but the BAR messurement is different. Is 130Bar min and 180Bar max the right muesurement of what I should be looking for??

Simple things first: 1. Check the state of your battery.. a flattish battery will cause all sorts of weird lights/messages
2. Check the connectors to the ECU up under the glove box on the bulkhead in the passenger footwell ... if they've come loose then you will get those exact symptoms...
can't think of any ingenious fix otherwise... been up too late watching the Olympics Hope the above helps