Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: All I want for Xmas is a MAF

  1. 23rd December 2012, 08:55 PM #11
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,038
    Total Downloaded
    0
    The boost modulator with its 3 hoses and an electrical connector is located just above the pipe going from the turbo to the I/C. It often fails in the position of never passing turbo pressure to the wastegate actuator which results in too much boost. Whilst 2700 is a little higher than normal, the surging is a sign of fuel being cut. Connect a hose from the turbo to I/C pipe pressure outlet directly to the wastegate actuator to revert to base boost of 1 bar as a temporary fix. The modulators are not expensive.

    Edit: Whilst disconnecting the MAF will prevent the ecm from operating the boost modulator to use more than base boost, it wont prevent overboosting caused by a failed boost modulator.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  2. 24th December 2012, 06:43 AM #12
    wardy1's Avatar
    wardy1
    wardy1 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Ringwood, Vic
    Posts
    2,127
    Total Downloaded
    0
    Quote Originally Posted by rangieman View Post
    I have a Td5 maf that has your name on it wardy but you know where i am so i guess im of no help
    Thanks mate. I'll be over to see you when I get back.

    Will have a look at the hose as mentioned by Graeme and if that's a no go, I'll disconnect the MAF until I get back.

    Thanks everyone for your help.
    D4 SDV6, a blank canvas
    Reply With Quote Reply With Quote
  3. 24th December 2012, 07:28 AM #13
    Landover's Avatar
    Landover
    Landover is offline Wizard Supporter
    Join Date
    Aug 2009
    Location
    Sunbury Victoria
    Posts
    1,133
    Total Downloaded
    0
    Maybe some nice person up that way could let you have a quick lend of there MAF to prove it's the culprit.
    Cheers, David.
    My Land Rover has made me a better Mechanic........
    D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
    Reply With Quote Reply With Quote
  4. 24th December 2012, 12:19 PM #14
    wardy1's Avatar
    wardy1
    wardy1 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Ringwood, Vic
    Posts
    2,127
    Total Downloaded
    0

    Smile

    Well, Santa came a little early and I GOT A NEW MAF!
    MR Automotive were open this morning and well... I'm $250 lighter in the wallet but WOW, what a difference a MAF makes
    Now I realise that mine has been on the blink for ages. The difference is just amazing.

    Thanks once again for all the advice and offers of help.
    D4 SDV6, a blank canvas
    Reply With Quote Reply With Quote
  5. 24th December 2012, 02:18 PM #15
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is online now RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    Thats why they are my goto guys...
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 28th December 2012, 01:53 PM #16
    DiscoDazza Guest
    It might not be a quick fix, (we are in Perth) but you can price from Rovercraft
    There is a LR parts out fit on Bruce HWY in Queensland, Ive seen there adds in the 4x4 mags???.....British Off Road.. 0754451094
    there is always(compare) Atlantic British parts....US249.95 + frt
    Rimmer brothers UK??!! a long wait this time of year
    Reply With Quote Reply With Quote
  7. 28th December 2012, 07:58 PM #17
    wardy1's Avatar
    wardy1
    wardy1 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Ringwood, Vic
    Posts
    2,127
    Total Downloaded
    0
    Quote Originally Posted by DiscoDazza View Post
    It might not be a quick fix, (we are in Perth) but you can price from Rovercraft
    There is a LR parts out fit on Bruce HWY in Queensland, Ive seen there adds in the 4x4 mags???.....British Off Road.. 0754451094
    there is always(compare) Atlantic British parts....US249.95 + frt
    Rimmer brothers UK??!! a long wait this time of year
    I paid $250 incl GST from MR Automotive in Redcliffe Qld. Not bad when you look at the US price

    Maybe some of our Aussie suppliers are starting to feel the bite with online sales..... bloody good thing!
    D4 SDV6, a blank canvas
    Reply With Quote Reply With Quote
  8. 28th December 2012, 09:41 PM #18
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Is the 250 for OEM or Genuine LR?
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« are you experianced | Un-even suspension 110 tray back. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!