Results 1 to 6 of 6

Thread: wide bearing hubs

  1. 10th June 2013, 01:26 PM #1
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0

    wide bearing hubs

    What models/years did they come on, and when did they change?
    Reply With Quote Reply With Quote
  2. 10th June 2013, 04:52 PM #2
    Dougal
    Dougal is offline ForumSage
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    If you are talking old vs new. The change to narrow spacing came with the redesign for abs. Around 92 in the rangie I think.
    Reply With Quote Reply With Quote
  3. 10th June 2013, 06:48 PM #3
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Yeah I am, thanks dougal. So anything pre ABS then?
    Reply With Quote Reply With Quote
  4. 10th June 2013, 07:11 PM #4
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    yes, up until the vented rotors came in, about 1990/1991.

    jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
    Reply With Quote Reply With Quote
  5. 10th June 2013, 07:15 PM #5
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Now to find some
    Reply With Quote Reply With Quote
  6. 11th June 2013, 06:33 AM #6
    Bush65
    Bush65 is offline YarnMaster
    Join Date
    Jan 1970
    Location
    'The Creek' Captain Creek, QLD
    Posts
    3,724
    Total Downloaded
    0
    Be aware that there was a very small change in the pitch diameter of the flange bolts from early to latter wide bearing hubs. Although a small difference it will prevent all of the bolts from fitting.

    I'm not sure exactly when the change occurred, but it seems to be a change from imperial to metric, but may have been the change from the old 10 spline cv's that had separate stub shafts. The old hubs will still be ok, but you need the correct drive flanges. Ashcroft and HTE have suitable flanges.
    Reply With Quote Reply With Quote
« 300TDi new head with International Engines plate. | Is changing diff centres a DIY job? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!