Results 1 to 5 of 5

Thread: disco series 2 TD5

  1. 24th July 2013, 09:01 AM #1
    Olddalby Guest

    disco series 2 TD5

    Engine imobiliser is giving me grief, for the past 12 months the imobiliser has not activated or had cause to do so. Using the code fob to open and lock has been ok, turn the key in the ignition to second position OK, try to start now not OK.

    To start to engine I now have to press the code fob a 3rd time to allow the engine to start whilst I am sat in the drivers seat, 'Q' is this normal? and why has it only just started to do it?

    I have the key turn code but have not tried to use the key turn codes yet, will this reset the imobiliser back to the way it was? I dare not try because this thing is currently outsmarting me and I do not want to make things worse, nor do I want to perform this function every time I re-enter the vehicle. Any cures out there.
    Reply With Quote Reply With Quote
  2. 24th July 2013, 10:13 AM #2
    bob10's Avatar
    bob10
    bob10 is offline CTRL + V! Subscriber
    Join Date
    May 2010
    Location
    brighton, brisbane
    Posts
    33,853
    Total Downloaded
    0
    When was the battery last changed? , Bob
    I’m pretty sure the dinosaurs died out when they stopped gathering food and started having meetings to discuss gathering food

    A bookshop is one of the only pieces of evidence we have that people are still thinking
    Reply With Quote Reply With Quote
  3. 24th July 2013, 04:08 PM #3
    Olddalby Guest
    I will be changing the fob battery shortly, it may be sending out a corrupted signal as the energy in the battery drops of, I will keep you posted, it's only been 3 months since I re-newed the battery, it could have been sat on a shelf for too long.
    Reply With Quote Reply With Quote
  4. 24th July 2013, 05:01 PM #4
    bob10's Avatar
    bob10
    bob10 is offline CTRL + V! Subscriber
    Join Date
    May 2010
    Location
    brighton, brisbane
    Posts
    33,853
    Total Downloaded
    0
    Quote Originally Posted by Olddalby View Post
    I will be changing the fob battery shortly, it may be sending out a corrupted signal as the energy in the battery drops of, I will keep you posted, it's only been 3 months since I re-newed the battery, it could have been sat on a shelf for too long.
    hopefully, that's all it is. Don't touch the flat surface of the battery with your fingers, apparently it is not kosher, Bob
    I’m pretty sure the dinosaurs died out when they stopped gathering food and started having meetings to discuss gathering food

    A bookshop is one of the only pieces of evidence we have that people are still thinking
    Reply With Quote Reply With Quote
  5. 24th July 2013, 05:51 PM #5
    dswatts's Avatar
    dswatts
    dswatts is offline Master Subscriber
    Join Date
    Jun 2010
    Location
    Fremantle
    Posts
    555
    Total Downloaded
    0
    Does your clock work?
    Clock uses the same fuse as engine immobiliser
    03 Disco 2a, TD5, Olso blue, 7 seater, Auto, Chipped, EGR'd, 2"lift, SLS, Dual Batteries, Provent, TM-2 engine saver
    Reply With Quote Reply With Quote
« v8 Firing order ? | speedo out by 8-10km/h »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!