Results 1 to 2 of 2

Thread: ace fixes hope thy help

  1. #1
    kenworth108 Guest

    Exclamation ace fixes hope thy help

    hi every one had a lot of problems with ace whrrrrrrrring noise a drone noise but could never find the problem until now , had a whole day just checking everything under car , found with hawkeye one of the solinoids on ace block was shot so took it apart and sure anoth it was ,so i replaced the parts that actually go inside ace block what solinoids sit on up top of block ,got another ace block worked ,what had to be done , and swaped it all over ,took a few hours but worth it , did,t have to bleed system at all , checked behind block found a few stones (like everyone on forum had said ), but also found ace line that go up chassis rail to front of enginee were touching steering shaft and rubbing on it and had small indents on where shaft had been rubbing when turning ,also found that the pipes were touching main harness to injectors had marks on that as well ,got some tiedowms heavy duty ones and tied it all back , all noises have gone and steering is much better , so if this any help to any one check these places ,

  2. #2
    Join Date
    Nov 2010
    Location
    Murgon
    Posts
    495
    Total Downloaded
    0
    Quote Originally Posted by kenworth108 View Post
    hi every one had a lot of problems with ace whrrrrrrrring noise a drone noise but could never find the problem until now , had a whole day just checking everything under car , found with hawkeye one of the solinoids on ace block was shot so took it apart and sure anoth it was ,so i replaced the parts that actually go inside ace block what solinoids sit on up top of block ,got another ace block worked ,what had to be done , and swaped it all over ,took a few hours but worth it , did,t have to bleed system at all , checked behind block found a few stones (like everyone on forum had said ), but also found ace line that go up chassis rail to front of enginee were touching steering shaft and rubbing on it and had small indents on where shaft had been rubbing when turning ,also found that the pipes were touching main harness to injectors had marks on that as well ,got some tiedowms heavy duty ones and tied it all back , all noises have gone and steering is much better , so if this any help to any one check these places ,
    Thanks for taking the time to write that up. I'll add those things to my list of stuff to check the next time I'm under the vehicle.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!