Reply With QuoteProbably not.
There was a change in the floor pan from Vin MA onwards which was around 1995 and the bases are not interchangeable. From memory the slides are also a different width.
Erich
Hi all.
Need to replace my drivers seat in my 1994 300Tdi Disco 1.
The only ones my local wreakers has (Rockhampton) are 1996/7 years. Do they interchange?
Thanks, Peter
ChatterBox
Probably not.
There was a change in the floor pan from Vin MA onwards which was around 1995 and the bases are not interchangeable. From memory the slides are also a different width.
Erich
Thanks...saved me some time. sweat and money.
Are there any aftermarket seats that fit without toooo much mucking around?
Peter
What's happened to your seat? Has it just sagged, or is it ripped?
Both mate, loaned to a heavy mate, Sydney return to pull a trailer and the seat given up the ghost. Have a cushion on it but not working.Originally Posted by sheerluck
Peter
You can buy a new diaphragm for under the seat base to get rid of the sag (made by Exmoor trim, distributed by Britpart stockists), or if you search the D1 forum, there was a couple of innovative solutions for a handful of cents.
For the rip, it's either a retrim, or covers.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks