Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Please help guys!!!!!!!

  1. #1
    Join Date
    Jan 2014
    Location
    Cape Town South Africa
    Posts
    15
    Total Downloaded
    0

    Please help guys!!!!!!!

    Okay, I should have said this before I posted my other thread. Anyway, I sold my Golf 4 to buy this Disco1 . It took lots of convincing on the wife's side to get it. Now, I have been trying to get rid of a misfire on sylinders 1, 3 and 5 for a while now, infact, ever since I had the car. I somehow managed to get rid of it for one night and it was back the next day again. Not sure what I did, the heart is there tio fix it, the pocket not so willing Things changed thus far:

    injectors
    injector o rings
    plugs, tried both Champion RN11's and NGK BPR6ES
    plug leads, Lucas leads
    dizzy cap, Lucas cap
    rotor, el cheapo
    coil, el cheapo
    fuel filter
    intake manifold gasket

    And now not sure what else to change/check. Only thing left I never changed is the ignition amplifier. Got spark on all leads, injectors all working fine. Could the ignition module somehow be the culprit? How does the spark get controlled on these engines?

    Cheers

  2. #2
    Join Date
    Mar 2007
    Location
    Canada
    Posts
    1,028
    Total Downloaded
    0
    Do you have the workshop manual? Have you gone through the ignition and EFI troubleshooting guides in the manual?

  3. #3
    Join Date
    Mar 2007
    Location
    Canada
    Posts
    1,028
    Total Downloaded
    0
    If you are keen, I would build a Rovergauge as well. https://code.google.com/p/rovergauge/

  4. #4
    Join Date
    Jan 1970
    Location
    Bayswater, Melbourne
    Posts
    815
    Total Downloaded
    0
    My experience is that the Rover V8 only likes genuine rotor and dissy cap. I would buy genuine parts as a first thing to do.

  5. #5
    Join Date
    Jan 1970
    Location
    St Helena,Melbourne
    Posts
    16,773
    Total Downloaded
    1.13 MB
    Yep, only use genuine cap and rotor and do Beeutey's ignition module upgrade - search forum for the tutorial.
    MY08 TDV6 SE D3- permagrin ooh yeah
    2004 Jayco Freedom tin tent
    1998 Triumph Daytona T595
    1974 VW Kombi bus
    1958 Holden FC special sedan

  6. #6
    Join Date
    Jul 2008
    Posts
    312
    Total Downloaded
    0
    wrong air filter ?

  7. #7
    Join Date
    May 2006
    Location
    Canberra
    Posts
    53
    Total Downloaded
    0
    Ignition amplifier does cause a lot of problems, mine ran good on petrol but misfired under load on LPG, I blamed the LPG system, turned out to be the ignition amplifier slowly getting weaker!

  8. #8
    Join Date
    Jan 2014
    Location
    Cape Town South Africa
    Posts
    15
    Total Downloaded
    0
    Hi guys, thanx for the replies and info. I have looked at Bee utye's thread. My landi came with that conversion where the amplifier was moved to just infront of teh air intake box. Gonna get myself the Lucas rotor over the weekend and see what happens. Funny though, I got spark on the plug and leads but still got the misfire. Another thing is, why cant I use my metal feeler gauge to set the air gap?

    Also, do you guys recommend using injector cleaner via the break booster/vacuum pipe to clean out the carbon deposits from the combustion chambers?

  9. #9
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Quote Originally Posted by ballistic View Post
    Also, do you guys recommend using injector cleaner via the break booster/vacuum pipe to clean out the carbon deposits from the combustion chambers?
    Tune-up in a can, eh? I'd be looking at the reason for carbon build up first, then possibly replacing the valve stem seals in situ, or doing a ring replacement with the heads and sump off. Have you done a compression test yet? It's pretty important to determine if the engine you're trying to diagnose is actually worth spending time on. These engines are not hard to destroy with either dust inhalation or overheating.

  10. #10
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Just a wild thought.
    1,3, AND 5 are all on the left bank.
    The injectors on the left bank are all fired at once from the ECU and the harnes goes to 7 then to 5,3,and 1..
    It is not unknown for the injector wires to crack and ground in front of 7.
    Maybe check the continuity of the injector harness and give it a visual inspection or maybe run a bridge from 7 and see if it makes a difference.
    Regards Philip A

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!