Results 1 to 3 of 3

Thread: NARVA 4wd sealed rocker switch

  1. #1
    Join Date
    Feb 2014
    Location
    Echuca
    Posts
    116
    Total Downloaded
    0

    NARVA 4wd sealed rocker switch

    Hi All,


    has anyone had any luck with the Narva 4wd sealed rocker switches.


    I have installed one for my aux lights but I seem to have a problem. with power to terminal 2 and terminal 8 grounded, the switch works as it should ie. when I switch it on the logo lights up. however, if I add a load (Aux light relay switch) to terminal 3, the aux lights come on but the switch light goes out. I have tried 2 of these switches now but both have the same fault. if anyone has these switches installed, let me know if I am doing something wrong.


    here is the link to the switch in question 4WD - Products - Narva

  2. #2
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    could be from a faulty batch - if you are close to where you bought it then take it back, or send it back for a replacement ?

  3. #3
    BigBlackDog Guest
    It sounds like you did it right! I just used 2 of these switches for some air lockers and had no dramas. Only thing I can think of would be if the earth line was not bonded well somewhere mit do that. Funny things can happen. Otherwise they sound like duds

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!