Thread: Where can I buy...?

Hey guy's I have an articale somewhere at home about a series 3 with PS using a series 1 disco steeing colum and rangie box

adam

Adam ! - run home, find it and bring it here ! (this article)
[img]style_emoticons/<#EMO_DIR#>/smile.gif[/img]
Regards
adam

Originally posted by DaveS3


I hated the old steering wheel, ans the black coating was comming of and getting all sticky. It was so hard to get it off your hands!

Is this to fit to a series???
As i have one on at the moment, same splines but you need to space out the wheel as the thread of the steering coloum is not long enough, so you will be able to rock the steeringwheel!
Dave

Sounds like the same issue a friends b/f is having - and looking for a replacement wheel... (small world).

What do you mean by "space out" the wheel.
How would I remove the old (S3) wheel and fit the new one ?
I've never even had a good look at a S3 setup before nor a clue how to remove or fit a Defender wheel. Any tips ?

All you need to do to take of the cover is to pry the centre cover off with a screw driver then uno the nut, and pull the whee off!! Easy [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

If you compare the series wheel and defender/disco type, you will see the in the centre of the wheel where the splines are longer on the series.

The defender splines are shorter, and when i first fitted it this differnce in spl;ine lenght allowed me to do the nut up on the steering coloum to the end of the thread, leaving play in the steering wheel (i could rock it on the splines 8O )

All i did to space it out was to add some LR spring washes and i locktited the nut/thread.

Hope this makes sense, you will understand if you do it!
This was just my way of doingit, there probaby is a better way to deal with the spline lenghts!

Dave! [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]