Stop looking!
Had a der moment, but found the answer on the top of the pump when I wiped the poo off![]()
I am connecting all the bits for my 200tdi into a S3 conversion; however; I am not sure which one of the two pipes on the top of the lift-pump is the inlet.
One is a steel pipe with unions and the other is steel with push-on plastic pipe.
Can someone let me know which is which please?
Cheers Charlie
Stop looking!
Had a der moment, but found the answer on the top of the pump when I wiped the poo off![]()
save yourself further moments...
remove it and blank it on the block and fit a facet pump that comes on with the IP solenoid.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks