- 
	
		
                        
                                
                                        
                                                27th May 2014, 11:20 AM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
		
			Overboost
		
		
				
					
					
				
				
		
			
				
					Hi All, 
I am continuing to get an overboost fault on my D2 td5. I have a VNT kit Including a boost box from BAS installed and re-tune by TD5 inside. 
I have run with the MAF unplugged and still get the fault showing . Just looking for suggestions for possible solutions. Any ideas? Thanks.
				
			 
			
		 
			
				
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                27th May 2014, 03:35 PM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Hello,
You will find that some of the BAS boxes do not work I fought with mine for a year, get one from TD5Inside. 
Ian
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                27th May 2014, 03:37 PM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					You can check if they are working using a Nanocom.
Take readings under acceleration, then disconnect the earth wire and repeat.
If the boost values are the same - it's not working.
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                27th May 2014, 03:53 PM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
		
			
				
					Thanks for the advice , i had a feeling the damn boost box wasn't working . I will test it as suggested and share the results . Cheers.
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
- 
	
		
                        
                                
                                        
                                                29th May 2014, 11:07 AM
                                        
                                
                                
                                        
                                                #5
                                        
                                        
                                        
                                
                        
		 
		
	 
	
		
		
		
				
				
					
				
		
			
				
					Ok, I did the test suggested by tombie and the boost box is clearly not working!
I wonder if BAS will give me a refund as it has never worked ....
				
			 
			
		 
			
				
			
			
			
		 
	 
	
	
 
		
		
		
	
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				
				Posting Permissions
			
			
				
	
		- You may not post new threads
 
		- You may not post replies
 
		- You may not post attachments
 
		- You may not edit your posts
 
		-  
 
	
	
	Forum Rules
 
			 
		 
	 
 
  
    Search AULRO.com ONLY! 
 | 
    Search All the Web! 
 | 
  
  
  
  
Bookmarks