Results 1 to 5 of 5

Thread: Overboost

  1. #1
    Join Date
    Jan 2010
    Location
    Tamworth
    Posts
    204
    Total Downloaded
    0

    Overboost

    Hi All,
    I am continuing to get an overboost fault on my D2 td5. I have a VNT kit Including a boost box from BAS installed and re-tune by TD5 inside.

    I have run with the MAF unplugged and still get the fault showing . Just looking for suggestions for possible solutions. Any ideas? Thanks.

  2. #2
    justfishing Guest
    Hello,
    You will find that some of the BAS boxes do not work I fought with mine for a year, get one from TD5Inside.
    Ian

  3. #3
    Tombie Guest
    You can check if they are working using a Nanocom.

    Take readings under acceleration, then disconnect the earth wire and repeat.

    If the boost values are the same - it's not working.

  4. #4
    Join Date
    Jan 2010
    Location
    Tamworth
    Posts
    204
    Total Downloaded
    0
    Thanks for the advice , i had a feeling the damn boost box wasn't working . I will test it as suggested and share the results . Cheers.

  5. #5
    Join Date
    Jan 2010
    Location
    Tamworth
    Posts
    204
    Total Downloaded
    0
    Ok, I did the test suggested by tombie and the boost box is clearly not working!
    I wonder if BAS will give me a refund as it has never worked ....

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!