Reply With QuoteIf the box is leaking from the bottom make sure that the bush/bearing for the sector shaft is not sloppy or it will just leak again in a few months.
Swaggie
Hi all, I have just bought a seal kit to replace all the seals in the box as its leaking quite badly. Has anyone done this before? Are there any things i should be looking out for or any tricks which might help me do the jod quicker or easier. Matt
The 4wd Zone/Opposite Lock Bathurst
263 Stewart Street, Bathurst, NSW
http://www.the4wdzone.com.au/
Discounts for AULRO members, just shoot me a PM before you purchase.
Master
If the box is leaking from the bottom make sure that the bush/bearing for the sector shaft is not sloppy or it will just leak again in a few months.
Swaggie
Hi Shaun, thanks again appreciate the advice. Matt
The 4wd Zone/Opposite Lock Bathurst
263 Stewart Street, Bathurst, NSW
http://www.the4wdzone.com.au/
Discounts for AULRO members, just shoot me a PM before you purchase.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks