Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 73

Thread: DESIGN AN OUTBACK, REMOTE AREA, EXPEDITION VEHICLE

  1. #51
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Not sure about that. Pretty sure I have pics of the sidewinder with and without portals. Mal himself told me it originally had a c4 auto, series 3 speed tcase and I think 253. Maybe the accident was in a different vehicle though - but I thought that was also in the sidewinder.
    Hard to believe one iteration clocked up 500000 k's.
    Sidewinder NEVER had portals.
    Major accident (head on) was RRC
    K118 trayback is the portaled vehicle

    Yes sidewinder originally had 253/C4/MD 3xspeed t/case/envs, but that was a LONG time ago when it was first built (70s) and considering mid 90s defenders have 400+k on them I dont think it a stretch of the imagination.

    Do you have a problem with me picking it as my touring car even if it hasnt done 500k in one guise?

  2. #52
    Join Date
    Jan 1970
    Location
    Toowoomba QLD
    Posts
    1,132
    Total Downloaded
    0
    Dare I say it, but my TD42 + T powered GU Patrol with 135 litres of factory fuel capacity and homemade storage system is for me the right combination of reliability, strength, capability, simplicity, power and economy for family outback touring. It has well and truly proven itself in this regard. With 280k on the clock, the body is now sporting a fair few cracks thanks to countless corrugations, but mechanically it is holding up well.

    Having said that, the Iveco 4 x4 looks even better but is out of my budget.

    Dont get me wrong, I (mostly) love my Land Rovers and am currently building up a Perentie for for the kind of 'touring' Dave S was talking about earlier, but credit is due where credit is due.....

  3. #53
    BigF350 Guest
    The 4.2l 6.07 MWM turbo diesel engine out of the F250's delivered to Aus (more power, quieter, smoother and 60kg lighter than a 4bd1t - and just as fuel efficient) with a ZF5 and NP271 transfer, all put in a 2005+ US F250 (coil sprung front), with one of these on the back:
    XPCamper | V1 - Full Size - XPCamper

    Turtle expeditions have been going round the globe in a similar setup since the 80's.

    I'd choose my current vehicle (2012 F250), but the prospect of getting water in the fuel, and having a $16,000 fuel system failure in the middle of no-where doesn't seem like fun.

    The swag etc. gets old when you are dealing with lots of bugs, or "inquisitive" locals. I've ridden most of the planet from the back of a dirt bike - fun, but if you are doing it year in, year out, you get to appreciate some comfort.

  4. #54
    Join Date
    Jan 1970
    Location
    Adelaide Hills - SA
    Posts
    12,486
    Total Downloaded
    0
    BigF350 - that XP/V1 camper unit looks amazing! I see its advertised pricing is:

    Camper with truck tray starting at $79,825 installed.



    [ame=http://www.youtube.com/watch?v=5SeEY0HPUPI]XPCamper Demo - YouTube[/ame]

  5. #55
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by BigF350 View Post
    The 4.2l 6.07 MWM turbo diesel engine out of the F250's delivered to Aus (more power, quieter, smoother and 60kg lighter than a 4bd1t - and just as fuel efficient)
    That 4.2 diesel is a 6 cylinder version of the HS28. Serge might have something to say about that. Particularly parts supply and cost.

    You won't get the same fuel economy as a 4BD1T It's 6 cylinder so more internal friction and more heat loss from the cylinders. Both mean lower efficiency.
    It has 132kw/510Nm in best form. You can beat that with a 4BD1T before you install an intercooler.
    Parts supply would be a problem. Just trying to find info on those engines is a task:

    http://dieselpower.co.uk/mwmsprint.htm

    But the camper looks excellent.

  6. #56
    BigF350 Guest
    Quote Originally Posted by Dougal View Post
    Parts supply would be a problem.
    Not if you speak Spanish or Portugese
    Parts are substantially cheaper than OEM Isuzu in my experience

    I can't speak to thermal efficiency, and don't question that on paper its not as efficient as a 4bd1t, but it will move a 3tonne F250 along at around 11l/100km. I can't imagine a 4bd1t would be appreciably better in such an application.


    I'm sure you can beat the power listed with a 4bd1t, but not from the factory. And if you start going in that direction... well...

    [ame]https://www.youtube.com/watch?v=7Ar15Zfyl5E[/ame]

  7. #57
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Quote Originally Posted by BigF350 View Post
    Not if you speak Spanish or Portugese
    Parts are substantially cheaper than OEM Isuzu in my experience

    I can't speak to thermal efficiency, and don't question that on paper its not as efficient as a 4bd1t, but it will move a 3tonne F250 along at around 11l/100km. I can't imagine a 4bd1t would be appreciably better in such an application.


    I'm sure you can beat the power listed with a 4bd1t, but not from the factory. And if you start going in that direction... well...

    https://www.youtube.com/watch?v=7Ar15Zfyl5E
    A stock 4BD1T can go to around 180hp just by turning screws. So yeah, completely factory.
    Swap the turbo, install an intercooler, turn the screws further and you're around 800Nm/200kw. Still no internal changes.

    Randy (Carcrafter) in the US had a modified injection pump and compound turbos on his 4BD1TT. It was a conservative 500kw. He was running 7x as much fuel as stock, but burnt clean. He put the 100psi gauge off the end and that killed the auto gearbox.
    Sadly that vehicle was lost in parts in a divorce. The engine was sold off in a jeep with single turbo dyno'd at 350rwhp.

    The one in that video is a seriously bad tune. It's just dumping fuel and has nothing down low.

  8. #58
    Join Date
    Dec 2009
    Location
    Williamstown, Barossa, SA
    Posts
    3,451
    Total Downloaded
    0
    The trouble with big 4 pot diesels is that they tend to shake whatever they are in to pieces, and their torque is very course.. 6 pots are smoother, and more gearbox friendly.. If they're direct injection they're also pretty good on fuel. A big lazy 6 hardly breaking a sweat is a better option than a 4 working its nuts off IMO... 8500kms now covered in the Cummins powered 101, and never more than 12lt/100km.
    1995 Mercedes 1222A 4x4
    1969 (Now know! Thanks Diana!!) Ser 2 Tdi SWB

    1991 VW Citi Golf Cti (soon to be Tdi)

    'When there's smoke, there's plenty of poke!!'
    'The more the smoke, the more the poke!!'

  9. #59
    lewy is offline Wizard Silver Subscriber
    Join Date
    Jan 1970
    Location
    darwin
    Posts
    1,502
    Total Downloaded
    0
    If you were on your own i would start with a suzuki siera 1.3 ltr hardtop no electronics much,good fuel.,get the suspension modified a little so it is not so harsh,some good seats,possibly airconditioned,

  10. #60
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Juat saw this on the weekend... I think I need to change my plans... Hydraulic drive is awesome... Just need a system with dual pumps and spare hoses and you would never lose drive...

    Attached Images Attached Images

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!