Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Custom S/Steel front brake lines.

  1. 7th December 2004, 07:45 PM #1
    HSVRangie Guest

    Custom S/Steel front brake lines.

    Well just had the guys from Maltech leave here.

    4 off front brake lines stock + 200 mm
    ADR 7 approved

    not very cheap.

    $320.00 set of 4 made while I waited.

    Michael.
    Reply With Quote Reply With Quote
  2. 7th December 2004, 08:23 PM #2
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    these the braided type?
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  3. 7th December 2004, 08:27 PM #3
    HSVRangie Guest
    yes worst thing was I watched them make them took all of 20 min not bad pay for that lol.

    Michael.
    Reply With Quote Reply With Quote
  4. 7th December 2004, 08:40 PM #4
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    are they installed yet?

    Come on Mick - where's the pix? [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img] [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img] [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img]

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  5. 8th December 2004, 09:48 AM #5
    HSVRangie Guest



    New brake lines.

    Michael.
    Reply With Quote Reply With Quote
  6. 8th December 2004, 02:19 PM #6
    uninformed
    uninformed is offline ForumSage
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    hey Michael, how do i calc how much extension i need. as too much could be a problem i guess? will have 2 inch lift, longer travel 80 series shocks

    cheers, Serg
    Reply With Quote Reply With Quote
  7. 8th December 2004, 06:08 PM #7
    HSVRangie Guest
    serg,

    add body lift new spring lift and amount of droop you will get.

    usually about 150mm required. i just went 200mm because I could, he was here making them.

    Michael.
    Reply With Quote Reply With Quote
  8. 10th April 2005, 08:16 PM #8
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    Hey Mick,

    Have you installed these yet? How do you find them?

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
  9. 10th April 2005, 09:46 PM #9
    walker's Avatar
    walker
    walker is offline Wizard
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,937
    Total Downloaded
    0
    I just bought some extended brake lines for the rangie. I thought about braided lines but decided against it as even braided lines to not guarentee no problems.

    A mate has braided lines on his lifted Disco (imported from UK) and just recently got a hole in one as it had twisted in the bracket and was rubbing on the insde of the tyre (or wheel).
    Reply With Quote Reply With Quote
  10. 10th April 2005, 09:59 PM #10
    LRHybrid100's Avatar
    LRHybrid100
    LRHybrid100 is offline YarnMaster Gold Subscriber
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    G'day Adam,

    Where did you get the extended brake lines from?

    And if you dont mind, how much did they cost?

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250




    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« CDL - Old Rangie | Oil in LT85 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!