Thread: Diff Transplant.

Yes have fitted toy diff centres to RR along with jacmac 30 spline axles and toy/longfield cv's.

Cost:

Axles:
front $500..00 set
Rear $550.00 set
Driive flanges $75.00 each. each x4

Toy diff centres what ever you can get them for, front must be hipinion.

Machine work:
bore out rear spindles aprox 20-30 thou. $25.00 each
bore out front spindle same and machine to take either toy or 110 cv (new chromo cv available from US). $100.00 each. + cv.
bore out swivell housing same amount.
Machine toy pinion flange to take RR drive shaft. $40.00 each.

works to diff housing.
needs to have new studs fitted to toy pattern (drill and tap) I have a template for this.

Michael.

DAS from this and other forums has just put Nissan axels under his RR.

There is a bit of fabrication needed, but he recons its not too bad.

HTH.

LRH

Only problem with fitting nissan diffs is that you loose all that ground clearance you were trying so hard to get.

Michael.