Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: Storage Draw Systems, Make your Own.... I've finished...YAY

  1. #11
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Well i got excited on the weekend and Ordered 24 meters of 20mm square tube and some angle and some flat.

    After looking into the back of the disco over a few coffee's and a few beers and some BBQ lunch and dinner i thought..... Mmm paying $2000 for a set of Draws is not a bad option....

    But i want to build these so i am...

    OK here is what i sussed out. the Rear area i wanted to carry alot of Crap like recovery, tools camping crap.... Dog...

    I also thought about carrying Jerry Cans. So i grabbed my Jerry and worked out it would fit in the sides where the rear "Dicky" Seats fit. So i pulled out the rear Trim and started Hacking and welding and grinding and cutting and cursing and drinking......
    After 12 hours i had made the LH rear Jerry mount with tie down points
    I did not just make a Box, but made it at window hight with provission to add a hinged lid when the jerrys were not in there. I used soem of the orig trim to match up against it so it will look professional and not a slapped together shoe box.

    I stole lots of ideas from others which is fantastic and i will post pix soon on my site. So next is the Drivers Side. This one is identical but the Filler pipe has a buldge in the body so i have to make it 1 inch wider. Still they should look great.

    Then the Center Draw/Slides part will take shape.
    I have not yet decided on Draws, Plastic tubs or ??? So i'll make a frame and put a top on it then make it for Draws but use Tubs for the time being. Then when i have some $$$ i'll get draws made up.

    I'm goint to make the center part the full width of the Wheel arch to Wheel Arch, But have 1/2 as full hight to windows and half as half hight with the option for a Fridge Slide.

    Then there will be a section for where the rear seat goes and that will be a lift up lid section. it might end up being storage for water. I'm not sure yet.

    Then there is the storage behind the Seat. This will be simple made of 3mm ply as a simple box with a Lid. it will be bolted down and have 1 power socket for the mini fridge (9 cans)

    As i have made mine a 2 seater it will be storage storage Storage.....

    If someone wants dimensions of what i'm doing i'll do a rough plan of it all and put it on the site as well.

    It will take a few weeks as i'm back at work and i can only work from 7pm to 9pm at night on it. Neighbors crack it if i grind at 11pm....

    Regards
    Steve

  2. #12
    RR5L Guest
    Originally posted by volvo164
    Well i got excited on the weekend and Ordered 24 meters of 20mm square tube and some angle and some flat.
    Hell Steve with 24 meters of tube you can do mine as well [img]style_emoticons/<#EMO_DIR#>/tongue.gif[/img]

    Make sure you take heaps of pics!

  3. #13
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    450
    Total Downloaded
    0
    I've just finished making a storage system for the back of my Disco. I've used a couple of sheets of 5 ply and a lot of screws. I prefer to use plastic tubs rather than drawers because of a) weight savings and [img]style_emoticons/<#EMO_DIR#>/cool.gif[/img] easier to pack things as the tubs can be carried around.

    I'll try and post some pics later.....

  4. #14
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Being Sneeky... Part 1

    Last night on the way home i was on the Train and as it went thru the industrial estates i was looking at piles of junk when i spotted a heap of timber and crap..... BINGO....

    So i drove back last night and loaded up the Disco with Timber...
    I found the following...

    1 2400x1200 7mm Ply sheet
    20 1000x1000 12mm MDF and ply panels..... YIPPPY

    a bit of Scrap steel and other Crap.

    Now the best part is next.
    One of the local Bunnings has a HUGE carpark and at the back of the Delivery area they have pallets after pallets of water damaged timber. yep hardwood, pine ect. It is near the Skips in the carpark.

    My theory is this. If it is a Public carpark and its not fenced off then it must be rubbish or scrap??? So i should not get into trouble for taking some???

    I NEED A UTE for this lot....... Truck would be better and Forklift...

    Anyhow my project is getting cheaper. All i need is a sheet or 2 of Checkerplate for the Sump and Tank guards......

    Steve

  5. #15
    VladTepes's Avatar
    VladTepes is offline Major Part of the Heart and Soul of AULRO Subscriber
    Join Date
    Feb 2004
    Location
    Bracken Ridge, Qld
    Posts
    16,055
    Total Downloaded
    0
    If you ask them they'll probably tell you to help yourself - it'll save them paying to dump it.
    It's not broken. It's "Carbon Neutral".


    gone


    1993 Defender 110 ute "Doris"
    1994 Range Rover Vogue LSE "The Luxo-Barge"
    1994 Defender 130 HCPU "Rolly"
    1996 Discovery 1

    current

    1995 Defender 130 HCPU and Suzuki GSX1400


  6. #16
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Photo's are now avail in the Members Gallery

    Look for "Volvo164 AKA Clarkie"
    Then sub folder of Modifications

    I have not finished the Draws or Jerry Holders, but it shows what i have done so far.

    Regards
    Steve

  7. #17
    Rovernaut Guest
    Steve are you takng the credit for the Welding or is it your good lady that made them for you???

  8. #18
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Hey how did you know my Missus was a Welder.....
    Hang on i think i know..... you have a Blue Disco....
    Hows the Missus and Kids??

    Nah i did them. Michelle is Painting them for me.

    I was impressed she can weld better than me, but if she does them, i'll forever get crap hung on me.... ops:

    Well tonight i'm back into it. i should get the RH side nearly complete.

    Then the weekend is Timber Time.

    Steve

  9. #19
    Rovernaut Guest
    Steve, Not Blue,Willow green.
    Tecoma. Yes missus and kids ok. Hope you had a good Xmas
    Cheers, Mario

  10. #20
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Not a bad Xmas.
    Been quiet...

    Hey i'll PM you

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!