Quote Originally Posted by AndrewMilne View Post
roverv8,
I have done what you suggested, and wound out the thread adjuster on the wastegate rod by just one turn. This seems to have done the trick. I have only been for one drive since where I could safely open it up a bit, and the jerkiness seems to have gone. My wastegate adjuster has a knurled adjusting nut inside a square "buckle", so that made it easy, once the locknut was slackened off.
Many thanks!
Andrew Milne
Yes , the adjuster on all the wastegate's ive seen is a s u described, that other pic/link just gives you the idea of what to do.
See how it goes, you may or may not need another turn,
Depending on how hard you drive it.....
Cheers