Is there a crown wheel and pinion gear ratio to suit 32s or do people only start changing from 33s and up cheers
Sent from my HTC_0P6B using AULRO mobile app
What vehicle?
Dave.
I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."
1983 RR gone (wish I kept it)
1996 TDI ES.
2003 TD5 HSE
1987 Isuzu County
4.11 will be too much for 32s but bang on for 33s.
Ashcroft do a 3.75 HD CW&P which will bring you basically back to stock on 32s, at least on a D2 they will.
Yea it's a 300tdi manual ,it's so tempting to go bigger haha don't people run 4.11s for 35s as well
Sent from my HTC_0P6B using AULRO mobile app
I have 2 diffs with 4.11's sitting in my shed to go into my D2 with 32 inch tyres. How it will go I don't know other than it will be revving a tad higher in top gear.
I did do a calculation a while ago and I think it was about 250 rpm.
Dave.
I was asked " Is it ignorance or apathy?" I replied "I don't know and I don't care."
1983 RR gone (wish I kept it)
1996 TDI ES.
2003 TD5 HSE
1987 Isuzu County
4.11:1
32" 124 ish kmh on speedo =110 road speed
33" 118 = 110
34" 113 = 110
35" roughly spot on
These are not calculated but driving and comparing speedo to gps so plenty of room for variance there
Somebody may chime in with calcs.
I hated 32" on stock gearing. Too much clutch slip required for hill starts and low range became too tall IMO
Sent from my GT-S7562L using AULRO mobile app
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks