-
8th December 2014, 10:22 AM
#1
TD5 Rotor Filter Housing Recoil Kit
I recently repaired the threads on my rotor filter housing. Now I have a recoil kit (M6) sitting around doing nothing. If anybody would like to do this job and needs a kit please let me know and I can post it out.
-
8th December 2014, 12:30 PM
#2
That is very kind of you, PM sent
-
8th December 2014, 04:26 PM
#3
Rotor Filter Housing
I never thought I would need to do this job as I have always used a torque wrench, but sure enough while travelling around Oz I did a service and both threads stripped out. Luckily longer bolts gripped well enough to get me home.
For anyone doing this job I would highly recommend buying an extra long 1/4 drill bit. The holes are a bit tricky to get to with a standard piece. I didnt have one, so I used vice grips and turned it by hand, work ok.
For the tap I used a 1/4 inch socket extension bar turned upside down, as was advised in another thread, worked perfectly.
-
8th December 2014, 08:23 PM
#4
Use long phillips head screws
That way the parts fitters (Mechanics) will not strip them
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks