Thread: Maxi-drive axle flanges ??seal???

Just a normal gasket- ie paper or goo.

Dave

Thanks Dave for your response but the leak appears to be coming from the big hexagon nut not from behind the pentagon shaped flange, so does it have an O-ring or is it thread tape that seals it cheers Dennis

Ohh. I thought they were one piece.

MAXI-DRIVE ENGINEERING

4 Ryecroft St, Carrara, Qld, Australia, 4211
Phone: 07 5530 3934
Fax: 07 5530 3932

If you dont get an answer.

Dave

Thanks Dave, I know where they are situated as Mal Storey modified my Santana box in our 110 it has all 3 shafts done to take tapered rollers instead of the standard bearings, but I might have to email him or his lovely wife, cheers mate Dennis

On mine the dealer had filled the end caps with silastic, but it still leaked.
I used Loctite Thread sealant on the threads . No more leak.
regards Philip A

loctite 567, it's a white past & that is what they told me to use when i fitted my maxi drive axles & drive flanges

Originally posted by PhilipA
On mine the dealer had filled the end caps with silastic, but it still leaked.
I used Loctite Thread sealant on the threads . No more leak.
regards Philip A

Hi
We had the same problem over here. Thought it was just mine that leaked and came lose but found out it was a few mates one's that were doing it as well. Put loctite sealent on no more leaks