Converting 110 wagon to softop?

**mark2** · 8th May 2005, 05:14 PM

Presumably I can use a Series rear tub, hoops and canvas, the main issue I see is attaching the canvas to the 110 windscreen frame. Any other issues? - fuel tank location might be an issue with a series tub?

Do I need to change the 110 windscreen frame to a softop type and can they be procurred?
or, am I better off using a Series 3 windscreen frame (prefer not to as the 110 w'screen has better visibility)

(Thanks Crossy for the reply to the previous post - I think this new subject is more relevant to what I'm trying to achieve.....)

**Ace** · 8th May 2005, 05:54 PM

I would have thought if you went to a canvas place they would be able to make one up and devise a way to fix it to the screen you have. I wasnt aware they were different in many ways. Matt

**UncleHo** · 8th May 2005, 08:20 PM

If you were to use the "rope-rail" off a series w/screen top and you would need the door frames and front canopy bow at least then you would be well on the way, my shopping list would be, Series 2/3, complete hood frame set including the series w/screen "rope-rail" these may be available at your local 4x4 wreckers or from 4wheel drives in Melbourne

**LRHybrid100** · 8th May 2005, 08:22 PM

you'll find it diffcult to find the D110 windscreen strip in AU, as most were military vehciles still in service.

I managed to get one while in the UK, however these suppliers are very good http://www.allwheeltrim.co.uk/Frames.htm#90

HTH

LRH

Thread: Converting 110 wagon to softop?

Thread Tools

Converting 110 wagon to softop?

Converting 110 wagon to Soft Top

Bookmarks

Bookmarks

Posting Permissions