If you didnt re solder that joint it will re offend.
Hi Guys,
I've been having intermittent problems with the operation of the rear windows on my 93 for a while. After a lot of frustration I pulled the Window lift ECU from beneath the centre console and attempted to find out what was up. I did this at least 5 times with little success.
Finally fixed it by examining all solder joints under a very strong light and a large magnifying glass. Found one poor soldered joint and sprayed the whole board with Jarcar's circuit Board cleaner paying close attention to the 5 small relays on the board. I even cleaned the contacts of those relays with cardboard.
Windows now work perfectly, hurrah.
I now spray all fuse sockets and if I pull an electrical connector apart I give that a spray too. A number of small niggly electrical happenings seem to have gone away. Worth keeping a spray can in the garage.
Cheers, Techron
If you didnt re solder that joint it will re offend.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Hi loanrangie,
Yes I did resolder the suspect joint and also one or two others which may have been OK but while the iron was hot!!!!
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks