Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: My Weekends Effort

  1. #1
    Join Date
    Jan 1970
    Location
    I'd Rather Push My Land Rover in QLD Than Drive A Toyota in NSW
    Posts
    1,671
    Total Downloaded
    0

    My Weekends Effort

    With most of the items sorted out by the end of last week I decided to start putting some of the gear on the car.

    A late start after lunch on Saturday :roll: saw the old bumper come off and the ARB winch bar installed with virtually no issues except for the repositioning of one of the transmission cooler lines to allow the winch cradle to fit properly :wink:
    In the beginning


    with rail mounts in pplace and bar ready to go on


    The finished product

  2. #2
    Join Date
    Jan 1970
    Location
    I'd Rather Push My Land Rover in QLD Than Drive A Toyota in NSW
    Posts
    1,671
    Total Downloaded
    0
    The next item was the removal of the old stereo and replacement with new Kenwood CD, MP3, WMA head unit with remote and blah blah blah, a reasonable buy I thought for $250 and so far it seems great, time, vibration and dust will tell :roll:

    Old unit out withe the help of 4 kebab skewers 8O



    And the replacement, fitted straight in with no issues with the wiring [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img]



    Things are going good, Sunday was oil change and snorkel time :wink:

  3. #3
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Looking Good....

  4. #4
    Join Date
    Jan 1970
    Location
    I'd Rather Push My Land Rover in QLD Than Drive A Toyota in NSW
    Posts
    1,671
    Total Downloaded
    0
    An earlier start on Sunday, around 10am :roll: well it is the weekend isnt it ops:

    First up the oil change, still a messy job and I realised there isnt as much room under a disco as compared to a lifted defender [img]style_emoticons/<#EMO_DIR#>/ohmy.gif[/img] :roll:

    Components of a good oil change



    Now to the snorkel, well suprisingly evrything went quite well, I tool plenty of time and cringed plenty when drilling the holes in that lovely paintwork, but I know that the raw cuts were well deburred and painted before the snorkel was fitted. The only real hassel I incounted was my airbox had been modified by someone previously by drilling 3 x 40mm holes 8O to improve airflow I would suppose and these had to be sealed, luckily this proved only a small delay to the whole install with the worst bit being the removal of the inner guard clips

    This box turns into



    a series of holes



    which then fits hopefully (if you used the template correctly :roll: )



    During the week I intend to install the turbo timer and my UHF [img]style_emoticons/<#EMO_DIR#>/laugh.gif[/img]

    And then I think I'll reward myself with a 4wd trip on the weekend 8)

    More pics in my album

    http://www.aulro.com/modules.php'set_album...=view_album.php

    Glen.

  5. #5
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    You work fast! Well done.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  6. #6
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,508
    Total Downloaded
    0
    Good work... you work fast Glen. I could have procrastinated about that lot for at least 3 weekends!
     2005 Defender 110 

  7. #7
    Join Date
    Jan 1970
    Location
    I'd Rather Push My Land Rover in QLD Than Drive A Toyota in NSW
    Posts
    1,671
    Total Downloaded
    0
    Originally posted by Captain_Rightfoot
    Good work... you work fast Glen. I could have procrastinated about that lot for at least 3 weekends!
    No time like the present, plus the bits aint no good sitting around in boxes on the garage floor :roll:

    I had intended to have the turbo timer and UHF in on the weekend too, but made the mistake of going shopping with the missus on Saturday morning which dragged on to having lunch out before I could get home and into it :wink:

    Glen.

  8. #8
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    instant horn material!!

    you like a bit of beach fishing seqfisho????
    i noticed the rods on the wall. i bought a garry howard 12'6''
    one piece befor i came to nsw. used it on straddie, by far the
    best beach rod ive ever fished!


    phil.

  9. #9
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    128
    Total Downloaded
    0

    My Weekends Effort

    Well done mate looks good.

    I found I cringed as well when cutting the panels for my snorkel(safari), but it fitted really well, and hasn't let me down yet, just a little corrosion on the bolts on windscreen pillar. (Installed in 1998). Looks like ARB changed the bar a little, with the rubber stops on the front and the cutouts on the vertical supports.

    What type of UHF and antenna did you get? Must get one soon, and replace the AM/SSB set.

  10. #10
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Nice Disco Glen
    GREEN(and gold) WITH ENVY.
    Its rewarding when you get stuck in yourself and everything works like it should.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!