Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: Sedimenter maintenance-300tdi

  1. #11
    Join Date
    Jan 1970
    Location
    Mullion Creek, NSW. 2800
    Posts
    870
    Total Downloaded
    0
    Originally posted by LRHybrid100
    you mean this one:



    can then change the $5 filter every oil change???

    LRH
    Thats looks like the type. I actually have this type under the bonnet replacing the origional steel fuel filter, very good.

    A note of warning to 130 owners, do not replace this filter with this type as where it sits along the chassis rail midway (TD5), water can crack the glass on wading (they get hot ?) and leak like a sieve, as happened on a trip to Gulf Easter 2004, we had to put my old steel one on my mates 130 to get him home. I believe a metal base can be bought to replace the glass base.

    I've seen the sedimetre swap on a County 3.9DL, will try it on mine next service when I change filters & see if any better than without.

    LRH by the way its a fuel filter I'm sure a typo on your part ops: :wink:

    Cheers

  2. #12
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    what I ment was you can change this fuel filter as often as you change the oil filter now - as the cost is much less, sorry for any confusion.

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250





  3. #13
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    I have one of those buggers....
    someone use superman force to tighten the bowl up.....

    Where do you get the filters from???

  4. #14
    Join Date
    May 2002
    Location
    Sydney, Australia
    Posts
    3,424
    Total Downloaded
    0
    bog standard filters on many plant / generators etc.

    last on I got was from Repco etc was about $7 or so

    LRH
    Disco 4 SDV6 Auto
    Disco 4 SDV8 Dual Cab Project
    Disco 2 M57 Extra Cab Project
    Foton Tunland Cummins ISF
    Disco 1 3 door 4.6 V8 Auto
    RRC V8 Auto "Classic" Softdash
    RRC 300 TDI Auto
    Disco 1 TD5 Auto Buggy
    Disco 1 300 Tdi Auto Ute
    SAME Explorer 70HP 4x4 Tractor plus Nell Loader
    Subaru GDA WRX
    Triumph Bonneville SE
    Yamaha TTR250





  5. #15
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Originally posted by LRHybrid100
    bog standard filters on many plant / generators etc.

    last on I got was from Repco etc was about $7 or so

    LRH
    Thanks.............

  6. #16
    Join Date
    Jan 1970
    Location
    Mullion Creek, NSW. 2800
    Posts
    870
    Total Downloaded
    0
    Originally posted by sclarke
    I have one of those buggers....
    someone use superman force to tighten the bowl up.....

    Where do you get the filters from???
    Karcraft stock them and mail order, about $60 a carton of 12, but also sell singles. Most auto outlets like Auto One will order if they don't stock them. Also most tractor parts outlets stock them common on most deisel tractors.

    Cheers
    Bryce

  7. #17
    Join Date
    Jan 1970
    Location
    Mullion Creek, NSW. 2800
    Posts
    870
    Total Downloaded
    0
    Originally posted by LRHybrid100
    what I ment was you can change this fuel filter as often as you change the oil filter now - as the cost is much less, sorry for any confusion.

    LRH
    Not confused, just poor comprehension on my part :roll:

    Bryce

  8. #18
    Join Date
    Jan 1970
    Location
    Warburton, Victoria
    Posts
    4,693
    Total Downloaded
    0
    Great Stuff....
    I'll have to have a better look at mine.
    Can you get the glass replaced with a tin bowl..

  9. #19
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Can you get the glass replaced with a tin bowl..
    yep.
    Our Fiat tractor uses two of those filters, one with the the glass bowl and the other with a metal one.
    The filter was originally designed by Lucas/CAV who pretty much wrote the specs for modern diesel injection, and it still carries the original Lucas/CAV pt. #, with most nearly all manufacturers making a substitute. As was stated, any truck/tractor/diesel filter stockist will have them.

    I think I'll grab an element next week and see if the stock sedimentor bowl will mate up to it.
    The only potential problem I can think of is too much pressure drop on the suction side of the lift pump reducing flow or causing starvation.
    Any toughts ?
    Last edited by p38arover; 23rd February 2010 at 06:10 AM.

  10. #20
    lacrits68 Guest

    what "base"

    Quote Originally Posted by LRHybrid100 View Post


    Hello!

    can anyone tell me product number/model/article the "base" and glass cup is? filter seems to be HDF296..!

    cheers

    Jan

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!