Thread: Mounting Kangeroo Jack to Defenders

Hi Jimmy,

On my first Defender I mounted it across the rear crossmember, two pieces of 12mm threaded rod and two of the existing holes lined up to holes in the jack and just used lock nuts to keep in place, it was out of the way and kept the weight down low instead of up on the roof rack, the only thing is a cover over the mech to keep the dust out :wink:

Hi all

I take the mechanism of the shaft, slide the shaft under the back seat with the handle and leave the mechanism in a bag in the back. (pack up very small and only take a few seconds to re-assemble)

Cheers

Originally posted by tdi130dualcab
Hi all

I take the mechanism of the shaft, slide the shaft under the back seat with the handle and leave the mechanism in a bag in the back. (pack up very small and only take a few seconds to re-assemble)

Cheers

Smart fella....

I slide mine the length of the body and it sits proud with the back door and the front of the back seet. it is then strapped down. mine is a 60" and not the 48" seen around

i might have to do what 130tdi does.....

nice ideas. THanks guys.

Mine is mounted up and down on a bracket bolted to the rear bumper and secured with another mounting on the top attached to the gutter. Works well but is a bit over engineered - given the simple ideas listed here.